Plot No-C1-1031-9, GIDC Estate, Panoli, Ankleshwar, Gujarat - 393002. India
Telephone Mobile: 91-7506449333; e-mail: info@crystalclearproducts.orgCalcium Acetate ---- Calcium Borogluconate ---- Calcium Butyrate ---- Calcium Caprylate ---- Calcium Carbonate ---- Calcium Chloride ---- Calcium Citrate ---- Calcium Disodium EDTA ---- Calcium Dobesilate ---- Calcium Fructoborate ---- Calcium Glubionate ---- Calcium Gluconate ---- Calcium Glycerophosphate ---- Calcium Hydroxide ---- Calcium Lactate ---- Calcium Lactobionate ---- Calcium Levulinate ---- Calcium Magnesium Lactate Gluconate ---- Calcium Nitrate ----Calcium Nitrite ---- Calcium Oxide ---- Calcium Phosphate Monobasic ---- Calcium Phosphate Dibasic ---- Calcium Phosphate Tribasic ---- Calcium Pidolate ---- Calcium Polystyrene Sulfonate ---- Calcium Propionate ---- Calcium Saccharate ---- Calcium Stearate ---- Calcium Sulfate ---- Calcium Undecylanate ---- Copper Cupric Chloride
Calcium Oxide Specifications of Commercial Pure & USP Food Grade Manufacturers & Exporters
Quick Lime or Calcium Oxide CAS Number 1305-78-8Specifications of Hand-picked Quick Lime or Calcium Oxide
Available lime as CaO: >85%
Total Lime (Alkalinity): >92%
Silica: 1%
Magnesia as MgO (max)%: 1%
Metal Oxides as Fe2O3&Al2O3(max)%: 0.2%Specifications of Calcium Oxide Powder:
Specifications ------- Premium ----- Top
% Available lime CaO - 90±2 -------- >85
Acid insolubles % ---- 0.50Maximum - 0.8 Maximum
Magnesium as MgO % --- 0.80Maximum - 1.0 Maximum
R2O3 % --------------- 0.15Maximum - 0.15Maximum
Mesh (BSS) ----------- 300 --------- 300
Specifications of Calcium Oxide FCC Food Grade
Lime or Quick Lime
CaO Formula weight 56.08
INS: 529 CAS: [1305-78-8]DESCRIPTION
Quick Lime or Calcium Oxide occurs as hard, white or gray-white masses or granules, or as a white to gray-white powder. One gram dissolves in about 840 mL of water at 25C and in about 1740 mL of boiling water. It is soluble in glycerin but insoluble in alcohol.
Function: pH control agent; nutrient; dough conditioner; yeast food.REQUIREMENTS
Identification: Slake Quick Lime or Calcium Oxide 1 g of sample with 20 mL of water, and add glacial acetic acid until the sample is dissolved. The resulting solution gives positive tests for Calcium.
Assay: Not less than 95.0% and not more than 100.5% of CaO (Lime or Calcium Oxide ) after ignition.
Acid-Insoluble Substances: Not more than 1%.
Alkalies or Magnesium: Not more than 3.6%.
Arsenic: Not more than 3 mg/kg.
Fluoride: Not more than 0.015%.
Lead: Not more than 2 mg/kg.
Loss on Ignition: Not more than 10.0%.
Specifications of Calcium oxide USP or Lime USP
Quick Lime, when freshly ignited to constant weight, contains not less than 95.0 percent of CaO, Calcium Oxide.Identification:
A: Moisten it with water: heat is generated, and a white powder is obtained (calcium hydroxide or slaked lime). Mix the powder with 3 or 4 times its weight of water: a smooth magma of lime forms that is alkaline to litmus.
B: Slake 1 g of Lime or Calcium Oxide with 20 mL of water, and add 6 N acetic acid until the lime is dissolved: the resulting solution responds to the test for Calcium.
Loss on ignition: Ignite a portion of Quick Lime or Calcium Oxide to constant weight in a tarred platinum crucible at 1100±50C it loses not more than 10.0% of its weight.
Insoluble substances: Slake 5 g of Quick Lime or Calcium Oxide, then mix with 100 mL of water, followed by hydrochloric acid, drop wise, with agitation, until solution takes place: the resulting solution after boiling and cooling is acid, and when filtered through a tarred crucible, washed with water until free of chlorides, and dried at 105 for 1 hour yields not more than 50 mg of insoluble substances (1.0%).
Carbonate: Slake 1 g, mix with 50 mL of water, and decant the greater portion of the milky liquid: the addition of an excess of 3 N hydrochloric acid to the residue does not cause more than a slight effervescence.
Magnesium and alkali salts: Dissolve 500 mg in 30 mL of water and 15 mL of 3 N hydrochloric acid. Neutralize the solution with 6 N ammonium hydroxide, heat to boiling, and add ammonium oxalate TS to precipitate the calcium completely. Heat the mixture on a steam bath for 1 hour, cool, dilute with water to 100 mL, mix, and filter. To 50 mL of the filtrate add 0.5 mL of sulfuric acid, evaporate to dryness, and ignite in a tarred platinum crucible to constant weight. The weight of the residue does not exceed 9 mg.Crystal Clear Products and the group companies are manufacturing chemicals since several decades. We have automatic vacuum operated titanium evaporators and SS316 equipments to produce top grade of chemical products. We have toll manufacturers and representatives in China, UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Bangkok Thailand, Kaula Lumpur Malaysia, Dubai UAE etc. & sales representative in Chicago, Houston New York & Los Angeles, USA. Associated units are FDA-GMP certified, Halal and/or Kosher certified, REACH registered, ISO-9001, ISO-22000 HACCP certified, Crisil Rated.
Contact Quick Lime Calcium Oxide USP FCC Food Grade manufacturers exporters at:
Crystal Clear Products
Plot No-C1-1031-9, GIDC Estate, Panoli, Ankleshwar, Gujarat - 393002. India
Telephone Mobile: 91-7506449333; e-mail: info@crystalclearproducts.orge-mail: info@crystalclearproducts.org
Manufacturers, Suppliers of IP BP USP FCC Food, ACS Reagent Grades of Chemicals like Calcium Oxide