Plot No-C1-1031-9, GIDC Estate, Panoli, Ankleshwar, Gujarat - 393002. India Telephone Mobile: 91-7506449333; e-mail: info@crystalclearproducts.org

Potassium Acetate ---- Potassium Ascorbate ---- Potassium Bicarbonate ---- Potassium Bitartrate ---- Potassium Bromide ---- Potassium Carbonate ---- Potassium Citrate ---- Potassium Chloride ---- Potassium Gluconate ---- Potassium Glycinate ---- Potassium Hydroxide ---- Potassium Iodate ---- Potassium Iodide ---- Potassium Metabisulfite ---- Potassium Molybdate ---- Potassium Monopersulfate ---- Potassium Nitrate ---- Potassium Nitrite ---- Potassium Oleate ---- Potassium Persulfate ---- Potassium Phosphate Monobasic ---- Potassium Phosphate Dibasic ---- Potassium Phosphate Tribasic ---- Potassium Pidolate ---- Potassium Propionate ---- Potassium Saccharate ---- Potassium Sorbate Manufacturer & Exporter

Potassium Chloride Specifications of Industrial Pure & BP Ph Eur USP IP Analytical Reagent FCC Food Grade & Micro Encapsulated Potassium Chloride Manufacturers & Exporters Please visit Potassium Chloride USP NF ACS BP Ph Eur EP JP IP Analytical reagent FCC Food grade & Micro Encapsulated Potassium Chloride Manufacturers our associates world class FDA-GMP approved, ISO-9001 Certified facility Anmol Chemicals Potassium Chloride CAS Number 7447-40-7 Micro Encapsulated Potassium Chloride Specifications of Potassium Chloride USP Grade KCl --- 74.55 Assay: Potassium Chloride contains not less than 99.0 percent and not more than 100.5 percent of KCl, calculated on the dried basis. Identification: A solution (1 in 20) responds to the tests for Potassium and for Chloride. Acidity or alkalinity: To a solution of 5.0 g in 50 mL of carbon dioxide-free water add 3 drops of phenolphthalein: no pink color is produced. Then add 0.30 mL of 0.020 N sodium hydroxide: a pink color is produced. Loss on drying: Dry it at 105 for 2 hours: it loses not more than 1.0% of its weight. Iodide or bromide: IODIDE: To pass the test. -- the limit is 0.005%. BROMIDE: To pass the test. -- the limit is 0.1%. Aluminum: where it is labeled as intended for use in hem dialysis to pass the test: --- the limit is 1 µg per g. Calcium and magnesium: To 20 mL of a solution (1 in 100) add 2 mL each of 6 N ammonium hydroxide, ammonium oxalate and dibasic sodium phosphate: no turbidity is produced within 5 minutes. Sodium: A solution (1 in 20), tested on a platinum wire, does not impart a pronounced yellow color to a non-luminous flame. Heavy metals: Dissolve 2.0 g in 25 mL of water: the limit is 0.001%. Organic volatile impurities: meets the requirements. Specifications of Potassium Chloride BP Grade KCl 74.55 DEFINITION Content: 99.0 per cent to 100.5 per cent of KCl (dried substance). CHARACTERS Appearance: White or almost white, crystalline powder or colorless crystals. Solubility: Freely soluble in water, practically insoluble in anhydrous ethanol. IDENTIFICATION It gives the reactions of chlorides. Solution S gives the reactions of potassium. TESTS Solution S: Dissolve 10.0 g in carbon dioxide-free water prepared from distilled water and dilute to 100 ml with the same solvent. Appearance of solution: Solution S is clear and colorless. Acidity or alkalinity: To 50 ml of solution S add 0.1 ml of bromothymol blue solution. Not more than 0.5 ml of 0.01 M hydrochloric acid or 0.01 M sodium hydroxide is required to change the color of the indicator. Bromides: Maximum 0.1 per cent. Iodides: Moisten 5 g by the drop wise addition of a freshly prepared mixture of 0.15 ml of sodium nitrite solution, 2 ml of 0.5 M sulphuric acid, 25 ml of iodide-free starch solution and 25 ml of water. After 5 min, examine in daylight. The substance shows no blue color. Sulphates: Maximum 300 ppm. Aluminium: Maximum 1.0 ppm, if intended for use in the manufacture of hem dialysis solutions. Barium: To 5 ml of solution S add 5 ml of distilled water and 1 ml of dilute sulphuric acid. After 15 min, any opalescence in the solution is not more intense than that in a mixture of 5 ml of solution S and 6 ml of distilled water. Iron: Maximum 20 ppm. Magnesium and alkaline-earth metals: Maximum 200 ppm, calculated as Ca. Sodium: Maximum 0.10 per cent, if intended for use in the manufacture of parenteral preparations or hem dialysis solutions. Heavy metals: Maximum 10 ppm. Loss on drying: Maximum 1.0 per cent, determined on 1.000 g by drying in an oven at 105 C for 3h. Specifications of Potassium Chloride IP Grade: Dry Basis Assay (KCl): 99.0% Potassium Chloride Description: White, crystalline powder, odorless. Solubility: Freely soluble in water; sparingly soluble in ethanol (95%). Matter Insoluble in Water: Clear & colourless solution (10% KCl w/w). Acidity or Alkalinity: Passes the Test Barium: Passes the Test Arsenic: 1 ppm maximum. Iron: 20 ppm maximum. Calcium & Magnesium: Passes the Test Sulphate: 300 ppm maximum. Heavy Metals: 10 ppm maximum. Bromide: 0.1% maximum. Iodide: Passes the Test Loss on Drying: 1.0% maximum. Specifications of Potassium Chloride FCC Food Grade KCl 74.55 DESCRIPTION: Potassium Chloride occurs as colorless, elongated, prismatic, or cubical crystals, or as a white, granular powder. It is stable in air. Its solutions are neutral to litmus. It may contain up to 1.0% (total) of suitable food-grade ant-caking, free-flowing, or conditioning agents such as calcium stearate or silicon dioxide, either singly or in combination. One gram dissolves in 2.8 mL of water at 25C, and in about 2 mL of boiling water. Potassium Chloride containing anti-caking, free-flowing, or conditioning agents may produce cloudy solutions or dissolve incompletely. It is insoluble in alcohol. Function: Nutrient; gelling agent; salt substitute; yeast food. REQUIREMENTS: Identification: A 1:20 aqueous solution gives positive tests for Potassium and for Chloride. Assay: Not less than 99.0% of KCl after drying; and not less than 98.0% of KCl after drying when a sample contains added substance. Acidity or Alkalinity: A sample containing no added substance passes test. Heavy Metals (as Pb): Not more than 5 mg/kg. Iodide and/or Bromide: Passes test. Loss on Drying: Not more than 1.0%. Sodium: Passes test. Potassium Chloride Analytical Reagent Specifications Formula Weight 74.55 CAS Number 7447-40-7 REQUIREMENTS Assay: 99.0-100.5% KCl pH of a 5% solution: 5.4-8.6 at 25C. MAXIMUM ALLOWABLE Insoluble matter: 0.005% Iodide (I): 0.002% Bromide (Br): 0.01% Chlorate and nitrate (as NO3): 0.003% Nitrogen compounds (as N): 0.001% Phosphate (PO4): 5 ppm Sulfate (SO4): 0.001% Barium (Ba): Passes test Heavy metals (as Pb): 5 ppm Iron (Fe): 3 ppm Calcium (Ca): 0.002% Magnesium (Mg): 0.001% Sodium (Na): 0.005% We also manufacture Micro Encapsulated Potassium Chloride, by encapsulating Potassium Chloride Granules with Hydrogenated Vegetable Oil or with a polymer as required by the buyer. Encapsulation makes the core material slow release or extended release. SDS MSDS of Potassium Chloride BP Ph Eur EP JP USP NF IP ACS Analytical Reagent FCC Food grade & Micro Encapsulated Potassium Chloride Manufacturers

Crystal Clear Products and the group companies are manufacturing chemicals since several decades. We have automatic vacuum operated titanium evaporators and SS316 equipments to produce top grade of chemical products. We have toll manufacturers and representatives in China, UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Bangkok Thailand, Kaula Lumpur Malaysia, Dubai UAE etc. & sales representative in Chicago, Houston New York & Los Angeles, USA. Associated units are FDA-GMP certified, Halal and/or Kosher certified, REACH registered, ISO-9001, ISO-22000 HACCP certified, Crisil Rated.

Contact Potassium Chloride IP BP Ph Eur EP JP USP NF ACS Analytical Reagent FCC Food Grade & Micro Encapsulated Potassium Chloride manufacturers exporters at:

Crystal Clear Products
Plot No-C1-1031-9, GIDC Estate, Panoli, Ankleshwar, Gujarat - 393002. India
Telephone Mobile: 91-7506449333; e-mail: info@crystalclearproducts.org

e-mail: info@crystalclearproducts.org

Manufacturers, Suppliers of IP BP Ph Eur EP JP USP NF FCC Food, ACS Reagent GMP Grades of Chemicals like Potassium Chloride & Micro Encapsulated Potassium Chloride