Plot No-C1-1031-9, GIDC Estate, Panoli, Ankleshwar, Gujarat - 393002. India Telephone Mobile: 91-7506449333; e-mail: info@crystalclearproducts.org

Potassium Acetate ---- Potassium Ascorbate ---- Potassium Bicarbonate ---- Potassium Bitartrate ---- Potassium Bromide ---- Potassium Carbonate ---- Potassium Citrate ---- Potassium Chloride ---- Potassium Gluconate ---- Potassium Glycinate ---- Potassium Hydroxide ---- Potassium Iodate ---- Potassium Iodide ---- Potassium Metabisulfite ---- Potassium Molybdate ---- Potassium Monopersulfate ---- Potassium Nitrate ---- Potassium Nitrite ---- Potassium Oleate ---- Potassium Persulfate ---- Potassium Phosphate Monobasic ---- Potassium Phosphate Dibasic ---- Potassium Phosphate Tribasic ---- Potassium Pidolate ---- Potassium Propionate ---- Potassium Saccharate ---- Potassium Sorbate Manufacturer & Exporter

Potassium Molybdate SDS MSDS of Manufacturers & Exporters Please visit of Potassium Molybdate USP NF ACS BP Ph Eur EP JP IP Analytical reagent FCC Food grade Manufacturers our associates world class FDA-GMP approved, ISO-9001 Certified facility Anmol Chemicals Potassium Molybdate CAS Number 13446-49-6 Potassium Molybdate SDS Safety Data Sheet MSDS, Material Safety Data Sheet 07-Aug-22 Section 1: Chemical Product and Company Identification Product Name & Other Names: Potassium molybdate or Molybdic acid potassium salt. CAS-No.: 13446-49-6 EINECS EC-Number: 236-599-2 Molecular Formula: K22MoO4 Molecular weight: 238.13 Relevant uses and uses advised against (if any): For laboratory and industrial use only. Suppliers: As per letterhead. Section 2: Hazards Identification GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910 Classification according to Regulation (EC) No 1272/2008: Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008. This substance is not classified as dangerous according to Directive 67/548/EEC. Labeling according to GHS & Regulation (EC) No 1272/2008 GHS Label Elements NONE Signal Word: None Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapors/spray. P262: Do not get in eyes, on skin, or on clothing. P281: Use personal protective equipment as required. P302+P352 - IF ON SKIN: Wash with plenty of soap and water. P303+P361+P353 - IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Section 3: Composition and Information on Ingredients Product Name & Other Names: Potassium molybdate or Molybdic acid potassium salt. CAS-No.: 13446-49-6 EINECS EC-Number: 236-599-2 Section 4: First Aid Measures Always seek medical advice after the first aid treatment. Skin: Wash off with soap and plenty of water. Eyes: Wash eyes with plenty of water for at least 15 minutes, lifting lids occasionally. Seek Medical Aid. Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Ingestion: Never give anything by mouth to an unconscious person. Section 5: Fire and Explosion Data Flammability of the Product: Non-flammable. Fire Fighting Media and Instructions: Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. Extinguishing Media Not recommended: None specified. Special hazards arising from the substance or mixture: Potassium oxides, Molybdenum oxides. Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used. Section 6: Accidental Release Measures Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Do not approach facing the wind. Environmental precautions: Do not let the product enter drains, soil, or water sources. Methods and materials used for containment cleanup procedures and Storage: Do not inhale dust, vapors, mist, or gas. Avoid dust formation. Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite). Use a shovel to put the material into a convenient waste disposal container. Section 7: Handling and Storage Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents. Section 8: Exposure Controls/Personal Protection Engineering Controls: Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits. Exposure Limits: USA ACGIH (TLV) 0.5 mg/m3 TWA USA OSHA 5 mg/m3 TWA. Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. Skin Protection: Wear protective gloves and clean body-covering clothing. Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area. Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling. Section 9: Physical and Chemical Properties Physical state and appearance: Colorless or white solid. Crystals or powder. Odor: Odorless. Odor threshold: Not available. pH: Not available. Relative density: Not available. Melting Point: 919C. Initial boiling point and boiling range: Not available. Flash point: Not available. Auto-ignition temperature: No information found. Decomposition temperature: No information found. Upper/lower flammability or explosive limits: No information found. Vapor pressure: No information found. Vapor density: No information found. Evaporation rate: No information found. Flammability (solid, gas): No information found. Partition coefficient: n-octanol/water: No information found. Solubility: Soluble in water. Viscosity: No information found. Molecular Formula: K22MoO4 Molecular weight: 238.13 Section 10: Stability and Reactivity Data Stability: Stable under the condition of storage. It is hygroscopic. Conditions of Instability: Incompatible materials, heat moisture. Incompatibility with various substances: Oxidizing agents. Polymerization: Will not occur. Hazardous Decomposition Products: Potassium oxides Section 11: Toxicological Information Toxicity to Animals: No information found. Carcinogenicity: Not listed by IARC, NTP, or CA Prop 65. Mutagenic Effects: No information found. Reproductive Effects: No information found. Developmental Effects: No information found. Teratogenicity: No information found. Section 12: Ecological Information Toxicity to fish: No information found. Persistence and Degradability: No information found. Mobility: No information found. Bioaccumulation/ Accumulation: No information found. Results of PBT and vPvB assessment: No information found. Section 13: Disposal Considerations Waste Disposal: Waste must be disposed of in accordance with federal, state, and local environmental control regulations. Section 14: Transport Information Land Transport DOT USA, TDG Canada & ADR/RID Europe: Not controlled. Sea Transport IMDG/IMO: Not controlled. Air Transport ICAO/IATA: Not controlled. Section 15: Other Regulatory Information USA: SARA 311/312 Hazards: No SARA Hazards. California Prop. 65 Components: Not listed to cause cancer, birth defects, or any other reproductive harm. Section 16 - Additional Information DISCLAIMER: The information and recommendations set forth herein are presented in good faith and believed correct as of the date hereof. It is compiled from various sources, and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules, or insurance requirements applicable. This SDS MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a professionally trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose. This shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship. In no case shall our company be liable to loss or damages by the product user. Specifications of Potassium Molybdate BP Ph Eur EP JP USP NF IP ACS Analytical Reagent FCC Food grade Manufacturers

Crystal Clear Products and the group companies are manufacturing chemicals since several decades. We have automatic vacuum operated titanium evaporators and SS316 equipments to produce top grade of chemical products. We have toll manufacturers and representatives in China, UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Bangkok Thailand, Kaula Lumpur Malaysia, Dubai UAE etc. & sales representative in Chicago, Houston New York & Los Angeles, USA. Associated units are FDA-GMP certified, Halal and/or Kosher certified, REACH registered, ISO-9001, ISO-22000 HACCP certified, Crisil Rated.

Contact Potassium Molybdate IP BP Ph Eur EP JP USP NF ACS Analytical Reagent FCC Food Grade manufacturers exporters at:

Crystal Clear Products
Plot No-C1-1031-9, GIDC Estate, Panoli, Ankleshwar, Gujarat - 393002. India
Telephone Mobile: 91-7506449333; e-mail: info@crystalclearproducts.org

e-mail: info@crystalclearproducts.org

Manufacturers, Suppliers of IP BP Ph Eur EP JP USP NF FCC Food, ACS Reagent GMP Grades of Chemicals like Potassium Molybdate