Plot No-C1-1031-9, GIDC Estate, Panoli, Ankleshwar, Gujarat - 393002. India Telephone Mobile: 91-7506449333; e-mail: info@crystalclearproducts.org

Aluminum Chloride Hexahydrate ---- Aluminium Potassium Sulphate ---- Aluminum Chlorohydrate ---- Aluminium Glycinate ---- Aluminium Magnesium Silicate ---- Dried Aluminium Phosphate ---- Dihydroxyaluminum Aminoacetate ---- Dihydroxyaluminum Sodium Carbonate ---- Aluminum Gluconate ---- Aluminum Monostearate & Aluminum Distearate ---- Aluminium Isopropoxide ---- Copper Cupric Chloride ---- Copper Sulfate ---- Ferric Ammonium Citrate ---- Ferric Chloride Hexahydrate ---- Ferric Nitrate Nonahydrate ---- Ferric Oxide ---- Ferric Sulfate ---- Ferrous Fumarate ---- Ferrous Gluconate ---- Ferrous Sulfate ---- Iron Aspartate ---- Iron Sulphide ---- Iron D Saccharate and Iron Sucrose Manufacturer & Exporter

Aluminum Chlorohydrate or Aluminium Chlorohydrate Dihydrate Anhydrous Powder and Solution Specifications of Commercial Pure & USP Grade Manufacturers & Exporters Please visit Aluminum Chlorohydrate or Aluminium Chlorohydrate Powder Dihydrate Anhydrous and Solution USP NF ACS BP Ph Eur EP JP IP Analytical reagent FCC Food grade Manufacturers our associates world class FDA-GMP approved, ISO-9001 Certified facility Anmol Chemicals Aluminum Chlorohydrate or Aluminium Chlorohydrate Powder Dihydrate CAS Number 12042-91-0 Aluminum Chlorohydrate or Aluminium Chlorohydrate Powder Anhydrous and CAS Number 1327-41-9 Specifications of Aluminum Chlorohydrate USP Powder: AIy (OH)3y-z Clz-H2O AIy (OH)3y-z Clz- 2H2O --- 210.48 AIy (OH)3y-z Clz --- 174.45 Aluminum chlorohydroxide, dihydrate; Aluminum hydroxychloride, dihydrate; Aluminum chlorohydroxide; Aluminum hydroxychloride; Dihydrate CAS 12359-72-7 Anhydrous CAS 12042-91-0 DEFINITION Aluminum Chlorohydrate consists of complex basic aluminum chloride that is polymeric and loosely hydrated and encompasses a range of aluminum-to-chloride atomic ratios between 1.91: 1 and 2.10: 1. It contains the equivalent of NLT 90.0% and NMT 110.0% of the labeled amount of anhydrous aluminum chlorohydrate [Aly (OH)3y-z Clz]. IDENTIFICATION A. Identification Tests: General, Aluminum and Chloride. Arsenic: NMT 2 ppm Limit of Iron: To pass the test. Acceptance criteria: 150 ppm; the color of the solution from the ;Sample solution is not darker than that of the solution from the Standard solution. pH: Sample solution: 15 g of Aluminum Chlorohydrate in 100 g of water Acceptance criteria: 3.0 to 5.0 Specifications of Aluminum Chlorohydrate Solution USP Grade: Aluminum Chlorohydrate Solution consists of complex basic aluminum chloride that is polymeric and encompasses a range of aluminum-to-chloride ratios between 1.91:1 and 2.10:1. The following solvents may be used: water, propylene glycol, dipropylene glycol, or alcohol. It contains the equivalent of not less than 90.0 percent and not more than 110.0 percent of the labeled concentration of anhydrous aluminum chlorohydrate. Labeling: Label Solution to state the solvent used and the claimed concentration of anhydrous aluminum chlorohydrate contained therein. Identification: A: A solution containing the equivalent of about 100 mg of anhydrous aluminum chlorohydrate per mL responds to the tests for Aluminum and for Chloride. B: Identification of propylene glycol (where stated on the label): Add about 10 mL of isopropyl alcohol to 2 g of Solution, mix, and filter. Evaporate the filtrate to about 1 mL on a steam bath: the IR spectrum of a film of this solution on a silver chloride disk exhibits maxima only at the same wavelengths as that of a similar preparation of a film of propylene glycol. C: Identification of dipropylene glycol (where stated on the label): Add about 10 mL of isopropyl alcohol to 2 g of Solution, mix, and filter. Evaporate the filtrate to about 1 mL on a steam bath: the IR spectrum of a film of this solution on a silver chloride disk exhibits maxima only at the same wavelengths as that of a similar preparation of a film of dipropylene glycol. D: Identification of alcohol (where stated on the label): In a small beaker mix 5 drops of Solution with 1 mL of potassium permanganate solution (1 in 100) and 5 drops of 2 N sulfuric acid. Immediately cover the beaker with filter paper moistened with a freshly prepared solution of 0.1 g of sodium nitroferricyanide and 0.25 g of piperazine in 5 mL of water: an intense blue color is produced on the filter paper, the color fading after a few minutes. pH: between 3.0 and 5.0, in a solution prepared by diluting 3 g of the solution with water to obtain 10 mL. Arsenic: Prepare the Test Preparation using an accurately weighed quantity of the Solution. The limit is 2 ppm. Heavy metals: Prepare the Test Preparation using an accurately weighed quantity of the Solution. The limit is 0.001%. Limit of iron: To pass the test --- (75 micro-gm per g). Content of aluminum: To pass the test. Content of chloride: To pass the test. Aluminum/chloride atomic ratio: --- the ratio is between 1.91:1 and 2.10:1. SDS MSDS of Aluminum Chlorohydrate or Aluminium Chlorohydrate Powder Dihydrate Anhydrous and Solution BP Ph Eur EP JP USP NF IP ACS Analytical Reagent FCC Food grade Manufacturers

Crystal Clear Products and the group companies are manufacturing chemicals since several decades. We have automatic vacuum operated titanium evaporators and SS316 equipments to produce top grade of chemical products. We have toll manufacturers and representatives in China, UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Bangkok Thailand, Kaula Lumpur Malaysia, Dubai UAE etc. & sales representative in Chicago, Houston New York & Los Angeles, USA. Associated units are FDA-GMP certified, Halal and/or Kosher certified, REACH registered, ISO-9001, ISO-22000 HACCP certified, Crisil Rated.

Contact Aluminum Chlorohydrate or Aluminium Chlorohydrate Powder Dihydrate Anhydrous and Solution IP BP Ph Eur EP JP USP NF ACS Analytical Reagent FCC Food Grade manufacturers exporters at:

Crystal Clear Products
Plot No-C1-1031-9, GIDC Estate, Panoli, Ankleshwar, Gujarat - 393002. India
Telephone Mobile: 91-7506449333; e-mail: info@crystalclearproducts.org

e-mail: info@crystalclearproducts.org

Manufacturers, Suppliers of IP BP Ph Eur EP JP USP NF FCC Food, ACS Reagent GMP Grades of Chemicals like Aluminum Chlorohydrate or Aluminium Chlorohydrate Powder Dihydrate Anhydrous and Solution