Plot No-C1-1031-9, GIDC Estate, Panoli, Ankleshwar, Gujarat - 393002. India Telephone Mobile: 91-7506449333; e-mail: info@crystalclearproducts.org

Ammonium Bromide ---- Ammonium Bicarbonate ---- Ammonium Carbonate ---- Ammonium Chloride ---- Ammonium Phosphate Monobasic ---- Ammonium Phosphate Dibasic ---- Ammonium Persulfate ---- Ammonium Sulfate ---- Bismuth Citrate ---- Bismuth Subcarbonate ---- Bismuth Subcitrate Potassium ---- Bismuth Subgallate ---- Heavy Bismuth Subnitrate ---- Bismuth Subsalicylate ---- Lithium Carbonate ---- Lithium Citrate ---- Lithium Hydroxide Manufacturer & Exporter

Ammonium Sulfate or Ammonium Sulphate SDS MSDS of Manufacturers & Exporters Please visit Ammonium Sulfate or Ammonium Sulphate USP NF ACS BP Ph Eur EP JP IP Analytical reagent FCC Food grade Manufacturers our associates world class FDA-GMP approved, ISO-9001 Certified facility Anmol Chemicals Ammonium Sulfate or Ammonium Sulphate CAS Number 7783-20-2 Ammonium Sulfate or Ammonium Sulphate SDS Safety Data Sheet MSDS, Material Safety Data Sheet 31-July-22 Section1. Product Information Product Name & Other Names: Ammonium Sulphate or Ammonium Sulfate or Diammonium Sulfate. CAS Number: 7783-20-2 EINECS EC Number: 231-984-1 Molecular Formula: (NH4)2SO4 Molecular Weight: 132,14 g/mol Relevant uses and uses advised against (if any): Industrial use only. Supplier: As per letterhead. Section 2. Hazards Identification GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910 Classification according to Regulation (EC) No 1272/2008 Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008. This substance is not classified as dangerous according to Directive 67/548/EEC. Labeling according to Regulation (EC) No 1272/2008 GHS Label Elements None Signal Words: None Precautionary statements: P262: Do not get in eyes, on skin, or on clothing. P264 Wash skin thoroughly after handling. P273 Avoid release to the environment. P305+ P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337+P313 If eye irritation persists: Get medical advice/ attention. P330: Rinse mouth. P360: Rinse immediately contaminated clothing and skin with plenty of water before removing clothes. Section 3. Composition/Information on Ingredients Product Name & Other Names: Ammonium Sulphate or Ammonium Sulfate or Diammonium Sulfate. CAS Number: 7783-20-2 EINECS EC Number: 231-984-1 Section 4. First Aid Measures Always seek medical attention after first aid measures are provided. Skin: Wash promptly with soap and water and flush with water until chemical is removed. Remove any contaminated clothing and wash before reuse. Get medical attention for irritation. Eyes: Flush promptly with plenty of water for at least 15 minutes. Get medical attention. Inhalation: Remove to fresh air. If breathing is difficult, give oxygen if a qualified operator is available. Get medical attention for irritation or discomfort. Ingestion: If conscious drink 2 to 4 glasses of water and induce vomiting by touching back of throat with finger. Section 5. First Aid Measures Flash Point: Not applicable Extinguishing Media: Any standard agent may be used. If involved in a fire, flood with water. Extinguishing Media Not recommended: None specified. Unusual Fire and Explosion Hazards: Ammonium Sulfate decomposes at elevated temperatures to produce toxic fumes of ammonia and sulfur oxides. If mixed with strong oxidizers such as ammonium nitrate or potassium salts (nitrite, nitrate, or chlorate), a vigorous reaction may occur. Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used. Do not let the product enter drain. Section 6. Accidental Release Measures Personal precautions, protective equipment, and emergency procedures: Ventilate area of leak or spill. Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Do not approach facing the wind. Environmental precautions: Do not let the product enter drains, soil, or water sources. Methods and materials used for containment cleanup procedures and Storage: Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g., sand, earth, diatomaceous earth, vermiculite). Vacuum or sweep-up and remove to an approved disposal container. Flush residue with water if permitted by applicable disposal regulations. Section 7. Handling and Storage Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents, strong acids & bases. Avoid Sources of ignition. Direct sunlight. Section 8. Exposure Controls/Personal Protection Exposure Limits: No occupational have been established for this product. Keep it at <10mg/m3. Engineering Controls: Provide local exhaust, if dusty conditions prevail. Respiratory Protection: Where dusty or misty conditions require it, use a NIOSH approved dust or mist respirator for needed protection. Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. Skin Protection: Wear protective gloves and clean body-covering clothing. Eye Protection: Use chemical safety goggles and/or full-face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area. Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice. Section 9. Physical and Chemical Properties Appearance: Colorless to off-white crystals or granules. Odor: Odorless Odor threshold: Not available. pH: 5-6 at 5% water solution. Relative density: around 1.77 Boiling Point: > 280C (536F) Melting Point: - 235C (-391F) Flash point: Not available. Auto-ignition temperature: No information found. Decomposition temperature: No information found. Upper/lower flammability or explosive limits: No information found. Vapor pressure: No information found. Vapor density: No information found. Evaporation rate: No information found. Flammability (solid, gas): No information found. Partition coefficient: n-octanol/water: No information found. Solubility in Water: (Weight %) 38% solution @ 20C Viscosity: No information found. Molecular Weight: 132.14 Chemical Formula: (NH4)2 SO4 Section 10. Stability and Reactivity Normally Stable (Conditions to Avoid): It is stable under normal conditions. Incompatibles: Oxidizers, e.g., potassium salts -nitrate, nitrite, chlorate, also chlorine or hypochlorite. Strong acids & bases. Avoid contact with zinc-clad and copper. Hazardous Decomposition Products: Ammonia and sulfur trioxide and sulfur dioxide gases. Hazardous Polymerization: Will not occur. Section 11. Toxicological Information Immediate (Acute) Effects: Acute Oral LD50 Rat: 2840 mg/kg Acute Inhalation LC50 Rat: > 1000 mg/m³ 8 Hours Acute Dermal: LD50 dermal rat: 2840 mg/kg (Rat) Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible, or confirmed human carcinogen by IARC. Mutagenic Effects: No information found. Teratogenic Effects: No information found. Developmental Toxicity: No information found. Reproductive Effects: No information found. Section 12. Ecological Information LC50 Fish-1: 5.2 - 8.2 mg/l (Exposure time: 96 h - Species: Oncorhynchus mykiss [static]) LC 50 Fish-2: 32.2 - 41.9 mg/l (Exposure time: 96 h - Species: Oncorhynchus mykiss [flow-through]) EC50 Daphnia-1: 423 mg/l (Exposure time: 24 h - Species: Daphnia magna) Bioaccumulation: Not expected to bioaccumulate. Persistence and Degradability: Not likely to persist. Mobility: Likely to be mobile due to water solubility. Section 13. Disposal Considerations Other Disposal Considerations: The product is a fertilizer; therefore, waste ammonium sulfate might be used as a fertilizer. If discarded to waterways, it may promote eutrophication. Disposal must be in accordance with applicable disposal regulations. Section 14. Transport Information Land Transport DOT USA, TDG Canada & ADR/RID Europe: Not controlled Sea Transport IMDG/IMO and Air Transport IATA/ICAO: Not controlled. Section 15. Regulatory Information USA Regulations: SARA Section 311/312: See section 2. California No Significant Risk Level: Not listed. Section 16. Other Information DISCLAIMER: The information and recommendations set forth herein are presented in good faith and believed correct as of the date hereof. It is compiled from various sources, and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules, or insurance requirements applicable. This SDS MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a professionally trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose. This shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship. In no case shall our company be liable to loss or damages by the product user. Specifications of Ammonium Sulfate or Ammonium Sulphate BP Ph Eur EP JP USP NF IP ACS Analytical Reagent FCC Food grade Manufacturers

Crystal Clear Products and the group companies are manufacturing chemicals since several decades. We have automatic vacuum operated titanium evaporators and SS316 equipments to produce top grade of chemical products. We have toll manufacturers and representatives in China, UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Bangkok Thailand, Kaula Lumpur Malaysia, Dubai UAE etc. & sales representative in Chicago, Houston New York & Los Angeles, USA. Associated units are FDA-GMP certified, Halal and/or Kosher certified, REACH registered, ISO-9001, ISO-22000 HACCP certified, Crisil Rated.

Contact Ammonium Sulfate or Ammonium Sulphate IP BP Ph Eur EP JP USP NF ACS Analytical Reagent FCC Food Grade manufacturers exporters at:

Crystal Clear Products
Plot No-C1-1031-9, GIDC Estate, Panoli, Ankleshwar, Gujarat - 393002. India
Telephone Mobile: 91-7506449333; e-mail: info@crystalclearproducts.org

e-mail: info@crystalclearproducts.org

Manufacturers, Suppliers of IP BP Ph Eur EP JP USP NF FCC Food, ACS Reagent GMP Grades of Chemicals like Ammonium Sulfate or Ammonium Sulphate