Plot No-C1-1031-9, GIDC Estate, Panoli, Ankleshwar, Gujarat - 393002. India Telephone Mobile: 91-7506449333; e-mail: info@crystalclearproducts.org

Ammonium Bromide ---- Ammonium Bicarbonate ---- Ammonium Carbonate ---- Ammonium Chloride ---- Ammonium Phosphate Monobasic ---- Ammonium Phosphate Dibasic ---- Ammonium Persulfate ---- Ammonium Sulfate ---- Bismuth Citrate ---- Bismuth Subcarbonate ---- Bismuth Subcitrate Potassium ---- Bismuth Subgallate ---- Heavy Bismuth Subnitrate ---- Bismuth Subsalicylate ---- Lithium Carbonate ---- Lithium Citrate ---- Lithium Hydroxide Manufacturer & Exporter

Bismuth Subgallate Specifications of Commercial Pure & BP Ph Eur USP Grade Manufacturers & Exporters Please visit Bismuth Subgallate USP NF ACS BP Ph Eur EP JP IP Analytical reagent FCC Food grade Manufacturers our associates world class FDA-GMP approved, ISO-9001 Certified facility Anmol Chemicals Bismuth Subgallate CAS Number 99-26-3 or 149-91-7 Specifications of Bismuth Subgallate USP Grade C7H5BiO6 -- 394.09 Gallic acid bismuth basic salt CAS 99-26-3. Bismuth Subgallate is a basic salt which, when dried at 105 for 3 hours, contains the equivalent of not less than 52.0 percent and not more than 57.0 percent of Bi2O3. Identification: A: When heated to redness, it at first chars, leaving finally a yellow residue. This residue responds to the tests for Bismuth. B: Agitate thoroughly about 100 mg with an excess of hydrogen sulfide, filter, and boil the filtrate to expel the dissolved gas. Cool, and add 1 drop of ferric chloride: a purplish blue mixture is produced. Loss on drying: Dry it at 105 for 3 hours. It loses not more than 7.0% of its weight. Limit of nitrate: Mix about 100 mg with 5 mL of 2 N sulfuric acid and 5 mL of ferrous sulfate, filter the mixture, and carefully superimpose the filtrate, without mixing, on 5 mL of sulfuric acid, in a test tube: no reddish brown color appears at the zone of contact of the two liquids. Arsenic: Triturate 400 mg with an equal weight of calcium hydroxide, and ignite. Dissolve the residue in 5 mL of 3 N hydrochloric acid: the solution without further treatment meets the requirements of the test for Arsenic 211 (7.5 ppm). Copper, Lead, and Silver: To pass the test. Limit of alkalies and alkaline earths: Boil 1.0 g with 20 mL of a mixture of equal volumes of 6 N acetic acid and water, cool, and filter. Precipitate the bismuth from the filtrate by the addition of hydrogen sulfide, boil the mixture, and filter. Add 5 drops of sulfuric acid to the filtrate, evaporate to dryness, and ignite to constant weight: the weight of the residue does not exceed 5 mg (0.5%). Free gallic acid: Shake 1.0 g with 20 mL of alcohol for 1 minute, filter and evaporate the filtrate to dryness on a steam bath, and dry the residue at 105 for 1 hour: the weight of the residue does not exceed 5 mg (0.5%). Specifications of Bismuth Subgallate BP Ph Eur Grade C7H5BiO6 394.1 --CAS 149-91-7 Ph Eur DEFINITION Complex of bismuth and gallic acid. Content: 48.0 per cent to 51.0 per cent of Bi (Ar 209.0) (dried substance). CHARACTERS Appearance: Yellow powder. Solubility: Practically insoluble in water and in alcohol. It dissolves in mineral acids with decomposition and in solutions of alkali hydroxides, producing a reddish-brown liquid. IDENTIFICATION A. Mix 0.1 g with 5 ml of water R and 0.1 ml of phosphoric acid R. Heat to boiling and maintain boiling for 2 min. Cool and filter. To the filtrate, add 1.5 ml of ferric chloride solution, a blackish-blue colour develops. B. It gives reaction (b) of bismuth (2.3.1). TESTS Solution S: In a porcelain or quartz dish, ignite 1.0 g, increasing the temperature very gradually. Heat in a muffle furnace at 600 ± 50C for 2 h. Cool and dissolve the residue with warming in 4 ml of a mixture of equal volumes of lead-free nitric acid and water and dilute to 20 ml with water. Acidity: Shake 1.0 g with 20 ml of water R for 1 min and filter. To the filtrate add 0.1 ml of methyl red solution. Not more than 0.15 ml of 0.1 M sodium hydroxide is required to change the colour of the indicator to yellow. Chlorides: Maximum 200 ppm. Nitrates: Maximum 0.2 per cent. Copper: Maximum 50.0 ppm. Lead: Maximum 20.0 ppm. Silver: Maximum 25.0 ppm. Substances not precipitated by ammonia: Maximum 1.0 per cent. Loss on drying: Maximum 7.0 per cent, determined on 1.000 g by drying in an oven at 105C for 3 h. SDS MSDS of Bismuth Subgallate BP Ph Eur EP JP USP NF IP ACS Analytical Reagent FCC Food grade Manufacturers

Crystal Clear Products and the group companies are manufacturing chemicals since several decades. We have automatic vacuum operated titanium evaporators and SS316 equipments to produce top grade of chemical products. We have toll manufacturers and representatives in China, UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Bangkok Thailand, Kaula Lumpur Malaysia, Dubai UAE etc. & sales representative in Chicago, Houston New York & Los Angeles, USA. Associated units are FDA-GMP certified, Halal and/or Kosher certified, REACH registered, ISO-9001, ISO-22000 HACCP certified, Crisil Rated.

Contact Bismuth Subgallate IP BP Ph Eur EP JP USP NF ACS Analytical Reagent FCC Food Grade manufacturers exporters at:

Crystal Clear Products
Plot No-C1-1031-9, GIDC Estate, Panoli, Ankleshwar, Gujarat - 393002. India
Telephone Mobile: 91-7506449333; e-mail: info@crystalclearproducts.org

e-mail: info@crystalclearproducts.org

Manufacturers, Suppliers of IP BP Ph Eur EP JP USP NF FCC Food, ACS Reagent GMP Grades of Chemicals like Bismuth Subgallate