Plot No-C1-1031-9, GIDC Estate, Panoli, Ankleshwar, Gujarat - 393002. India Telephone Mobile: 91-7506449333; e-mail: info@crystalclearproducts.org

Aluminum Chloride Hexahydrate ---- Aluminium Potassium Sulphate ---- Aluminum Chlorohydrate ---- Aluminium Glycinate ---- Aluminium Magnesium Silicate ---- Dried Aluminium Phosphate ---- Dihydroxyaluminum Aminoacetate ---- Dihydroxyaluminum Sodium Carbonate ---- Aluminum Gluconate ---- Aluminum Monostearate & Aluminum Distearate ---- Aluminium Isopropoxide ---- Copper Cupric Chloride ---- Copper Sulfate ---- Ferric Ammonium Citrate ---- Ferric Chloride Hexahydrate ---- Ferric Nitrate Nonahydrate ---- Ferric Oxide ---- Ferric Sulfate ---- Ferrous Fumarate ---- Ferrous Gluconate ---- Ferrous Sulfate ---- Iron Aspartate ---- Iron Sulphide ---- Iron D Saccharate and Iron Sucrose Manufacturer & Exporter

Dihydroxyaluminum Aminoacetate or Dihydroxyaluminium Aminoacetate Specifications of Commercial Pure & BP Ph Eur USP Grade Manufacturers & Exporters Please visit Dihydroxyaluminum Aminoacetate or Dihydroxyaluminium Aminoacetate USP NF ACS BP Ph Eur EP JP IP Analytical reagent FCC Food grade Manufacturers our associates world class FDA-GMP approved, ISO-9001 Certified facility Anmol Chemicals Dihydroxyaluminum Aminoacetate or Dihydroxyaluminium Aminoacetate CAS Number 41354-48-7 or 13682-92-3 Dihydroxyaluminum Aminoacetate USP Grade Specifications: C2H6AlNO4-xH2O Aluminum, (glycinato-N,O)dihydroxy-, hydrate. (Glycinato)dihydroxyaluminum ;hydrate CAS 41354-48-7 Anhydrous 135.05 CAS 13682-92-3. Dihydroxyaluminum Aminoacetate yields not less than 94.0 percent and not more than 102.0 percent of dihydroxyaluminum aminoacetate (C2H6AlNO4), calculated on the dried basis. It may contain small amounts of aluminum oxide and of Aminoacetic Acid. Identification: Suspend 1 g in 25 mL of water, add hydrochloric acid, dropwise, until a clear solution is formed, and divide it into two equal parts for the following tests. A: One portion of the solution responds to the tests for Aluminum. B: To the other portion of the solution add 1 drop of liquefied phenol and 5 mL of sodium hypochlorite: a blue color is produced. pH: between 6.5 and 7.5, in a suspension of 1 g of it, finely powdered, in 25 mL of water. Loss on drying: Dry it at 130C to constant weight: it loses not more than 14.5% of its weight. Mercury: --- the limit is 1 ppm. Isopropyl alcohol: Transfer about 5 g to a flask provided with a reflux condenser and add 100 mL of potassium permanganate solution (1 in 300) and 10 mL of sulfuric acid. Reflux the mixture for 30 minutes, distill and collect 10 mL of the distillate. To 1 mL of the distillate add 5 drops of sodium nitroferricyanide TS and 2 mL of 1 N sodium hydroxide, then add a slight excess of 6 N acetic acid: no red color is produced. Nitrogen: Determine the nitrogen content as directed under Nitrogen Determination, using about 100 mg, previously dried and accurately weighed. Each mL of 0.1 N sulfuric acid is equivalent to 1.401 mg of nitrogen. Not less than 9.90% and not more than 10.60% of nitrogen is found. Aluminium Glycinate BP Ph Eur Grade Specifications C2H6AlNO4-xH2O --- 135.1 --- CAS 41354-48-7 Action and use: Antacid. DEFINITION Aluminium Glycinate is a basic aluminium monoglycinate, partly hydrated. It contains not less than 34.5% and not more than 38.5% of Al2O3 and not less than 9.9% and not more than 10.8% of N, both calculated with reference to the dried substance. CHARACTERISTICS A white or almost white powder. Practically insoluble in water and in organic solvents. It dissolves in dilute mineral acids and in aqueous solutions of the alkali hydroxides. IDENTIFICATION A. Add 0.1 g to 10 ml of a solution prepared by dissolving 0.84 g of citric acid in 8 ml of 1M sodium hydroxide and diluting to 20 ml with water. Add 0.5 ml of a 0.1% w/v solution of ninhydrin in methanol and warm. A purple colour is produced. B. Suspend 1 g in 25 ml of 0.5M hydrochloric acid and heat gently until a clear solution is produced. Reserve half of the solution. To 2 ml of the solution add 0.15 ml of liquefied phenol , shake and add carefully without shaking 5 ml of dilute sodium hypochlorite solution. A blue colour is produced. C. The solution reserved in test B yields the reaction characteristic of aluminium salts. TESTS Acidity or alkalinity: pH of a suspension of 1 g in 25 ml of carbon dioxide-free water, 6.5 to 7.5. Neutralising capacity: Shake 0.2 g vigorously with 25 ml of 0.1M hydrochloric acid for 5 minutes and allow to stand for 5 minutes. The pH of the mixture is greater than 3.0. Arsenic: Dissolve 2.0 g in 18 ml of brominated hydrochloric acid and 32 ml of water. 25 ml of the resulting solution complies with the limit test for arsenic, 1 ppm. Heavy metals: Dissolve 1.5 g in 20 ml of 2M hydrochloric acid and 10 ml of water, add 0.5 ml of nitric acid and boil for about 30 seconds. Cool, add 2 g of ammonium chloride and 2 g of ammonium thiocyanate and extract with two 10 ml quantities of a mixture of equal parts of isoamyl alcohol and ether . To the aqueous layer add 2 g of citric acid. 12 ml of the resulting solution complies with limit test A for heavy metals, Appendix VII. Use lead standard solution (1 ppm Pb) to prepare the standard (20 ppm). Mercuric salts: To pass the test. Chloride: Dissolve 1.0 g in 10 ml of 2M nitric acid and dilute to 100 ml with water. 15 ml of the resulting solution complies with the limit test for chlorides, Appendix VII (330 ppm). Loss on drying: When dried to constant weight at 130C, loses not more than 12.0% of its weight. Use 1 g. SDS MSDS of Dihydroxyaluminum Aminoacetate or Dihydroxyaluminium Aminoacetate BP Ph Eur EP JP USP NF IP ACS Analytical Reagent FCC Food grade Manufacturers

Crystal Clear Products and the group companies are manufacturing chemicals since several decades. We have automatic vacuum operated titanium evaporators and SS316 equipments to produce top grade of chemical products. We have toll manufacturers and representatives in China, UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Bangkok Thailand, Kaula Lumpur Malaysia, Dubai UAE etc. & sales representative in Chicago, Houston New York & Los Angeles, USA. Associated units are FDA-GMP certified, Halal and/or Kosher certified, REACH registered, ISO-9001, ISO-22000 HACCP certified, Crisil Rated.

Contact Dihydroxyaluminum Aminoacetate or Dihydroxyaluminium Aminoacetate IP BP Ph Eur EP JP USP NF ACS Analytical Reagent FCC Food Grade manufacturers exporters at:

Crystal Clear Products
Plot No-C1-1031-9, GIDC Estate, Panoli, Ankleshwar, Gujarat - 393002. India
Telephone Mobile: 91-7506449333; e-mail: info@crystalclearproducts.org

e-mail: info@crystalclearproducts.org

Manufacturers, Suppliers of IP BP Ph Eur EP JP USP NF FCC Food, ACS Reagent GMP Grades of Chemicals like Dihydroxyaluminum Aminoacetate or Dihydroxyaluminium Aminoacetate