Plot No-C1-1031-9, GIDC Estate, Panoli, Ankleshwar, Gujarat - 393002. India Telephone Mobile: 91-7506449333; e-mail: info@crystalclearproducts.org

Aluminum Chloride Hexahydrate ---- Aluminium Potassium Sulphate ---- Aluminum Chlorohydrate ---- Aluminium Glycinate ---- Aluminium Magnesium Silicate ---- Dried Aluminium Phosphate ---- Dihydroxyaluminum Aminoacetate ---- Dihydroxyaluminum Sodium Carbonate ---- Aluminum Gluconate ---- Aluminum Monostearate & Aluminum Distearate ---- Aluminium Isopropoxide ---- Copper Cupric Chloride ---- Copper Sulfate ---- Ferric Ammonium Citrate ---- Ferric Chloride Hexahydrate ---- Ferric Nitrate Nonahydrate ---- Ferric Oxide ---- Ferric Sulfate ---- Ferrous Fumarate ---- Ferrous Gluconate ---- Ferrous Sulfate ---- Iron Aspartate ---- Iron Sulphide ---- Iron D Saccharate and Iron Sucrose Manufacturer & Exporter

Iron (II) or Ferrous Sulfate or Ferrous Sulphate Heptahydrate, Monohydrate and Anhydrous SDS MSDS of Manufacturers & Exporters Please visit Ferrous Sulfate or Ferrous Sulphate Heptahydrate, Monohydrate and Anhydrous USP NF ACS BP Ph Eur EP JP IP Analytical reagent FCC Food grade Manufacturers our associates world class FDA-GMP approved, ISO-9001 Certified facility Anmol Chemicals Iron (II) or Ferrous Sulfate or Ferrous Sulphate Heptahydrate CAS Number 7782-63-0 Iron (II) or Ferrous Sulfate or Ferrous Sulphate Monohydrate CAS Number 17375-41-6 Iron (II) or Ferrous Sulfate or Ferrous Sulphate Anhydrous CAS Number 7720-78-7 Micro-Encapsulated Iron (II) Sulfate or Ferrous Sulfate or Ferrous Sulphate Ferrous Sulfate or Ferrous Sulphate or Iron II Sulfate SDS GHS, Safety Data Sheet MSDS Sheet, Material Safety Data Sheet 24-July-22 1. Product Identification Product Name & Other Names: Ferrous Sulfate or Ferrous Sulphate or Iron II Sulfate Dried Anhydrous Monohydrate Heptahydrate. CAS No.: 7720-78-7 (anhydrous), 17375-41-6 (monohydrate), 7782-63-0& (heptahydrate) EINECS EC Number: 231-753-5 Molecular Weight: 278.01 for Heptahydrate. Chemical Formula: FeSO4-7H2O for Heptahydrate. Relevant uses and uses advised against (if any): Industrial Manufacturing. Suppliers: As per letterhead. 2. Hazards Identification GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910 Classification according to Regulation (EC) No 1272/2008 Acute toxicity, Oral (Category 4), H302 Skin irritation (Category 2), H315 Eye irritation (Category 2), H319 Labeling according to GHS & Regulation (EC) No 1272/2008 GHS Label Elements Irritant Signal Words: Warning Hazard statements: H302: Harmful if swallowed. H315: Causes skin irritation. H319: Causes serious eye irritation. Precautionary statements: P264: Wash --- thoroughly after handling. P270: Do not eat, drink or smoke when using this product. P280: Wear protective gloves/protective clothing/eye protection/face protection. P330: Rinse mouth. P362: Take off contaminated clothing and wash before reuse. P301+312: IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell. P302+352: IF ON SKIN: Wash with soap and water. P332+313: If skin irritation occurs: Get medical advice/attention. P305+351+338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do – continue rinsing. P337+313: If eye irritation persists get medical advice/attention. 3. Composition/Information on Ingredients Product Name & Other Names: Ferrous Sulfate or Ferrous Sulphate or Iron II Sulfate Dried Anhydrous Monohydrate Heptahydrate. CAS No.: 7720-78-7 (anhydrous), 17375-41-6 (monohydrate), 7782-63-0 (heptahydrate) EINECS EC Number: 231-753-5 4. First Aid Measures Always seek medical attention after first aid measures are provided. Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention. Ingestion: Never give anything by mouth to an unconscious person. Get medical attention. Skin Contact: Wipe off excess material from skin then immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse. Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately. 5. Fire Fighting Measures Flammability of the Product: Non-flammable. Products of Combustion: Sulfur oxides, Oxides of Iron etc. Extinguishing Media Not recommended: None specified. Fire Extinguishing Media: Use water spray, alcohol-resistant foam, dry chemical, or carbon dioxide. Use means suitable for extinguishing surrounding fire. Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used. Uninvolved persons should evacuate to a safe place. Containers may explode on heating. 6. Accidental Release Measures Personal precautions, protective equipment, and emergency procedures: Ventilate area of leak or spill. Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces. Do not approach facing the wind. Environmental precautions: Do not let the product enter drains, soil, or water sources. Methods and materials used for containment cleanup procedures and Storage: Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g., sand, earth, diatomaceous earth, vermiculite). Vacuum or sweep-up and remove to an approved disposal container. Finish cleaning by spreading water on the contaminated surface and allow to evacuate as per law. 7. Handling and Storage Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces. Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents and alkalis. 8. Exposure Controls/Personal Protection Airborne Exposure Limits: TWA 1 mg/m3: USA ACGIH Threshold Limit Values (2011) REL 1 mg/m3: USA NIOSH: Pocket Guide to Chemical Hazards (2010) TWA 1 mg/m3: USA OSHA Table Z-1-A (29 CFR 1910.1000) (1989) Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. Skin Protection: Wear protective gloves and clean body-covering clothing. Eye Protection: Use chemical safety goggles and/or full-face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area. Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling. 9. Physical and Chemical Properties Appearance: Bluish green powder or crystals. Odor: It is odorless. Odor threshold: Not available. pH: 3-4. Relative density: around 1.9 Boiling Point: >300C. Melting Point: 64C. Flash point: Not available. Auto-ignition temperature: No information found. Decomposition temperature: No information found. Upper/lower flammability or explosive limits: No information found. Vapor pressure: No information found. Vapor density: No information found. Evaporation rate: No information found. Flammability (solid, gas): No information found. Partition coefficient: n-octanol/water: No information found. Solubility: It is freely soluble in water. Viscosity: No information found. Molecular Weight: 278.01 Chemical Formula: FeSO4-7H2O (Other Hydrates also have the same CAS Number). 10. Stability and Reactivity Stability: Stable under ordinary conditions of use and storage. Hazardous Decomposition Products: It emits toxic sulfur fumes and iron oxide when heated to decomposition. Hazardous Polymerization: Will not occur. Incompatibilities: Strong oxidizing agents and alkalis. Conditions to Avoid: Incompatibles, heat, light, and moisture. 11. Toxicological Information Toxicity data LD50 Oral - Mouse - 1,520 mg/kg (Ferrous sulfate heptahydrate) LD 50 Oral (Rat) - 319 mg/kg (Ferrous sulfate heptahydrate) LD50 Intraperitoneal - Mouse - 245 mg/kg (Ferrous sulfate heptahydrate) LD50 Intravenous - Mouse - 51 mg/kg (Ferrous sulfate heptahydrate) Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as possible or confirmed human carcinogen by IARC, ACGIH, OSHA and NTP. Mutagenic Effects: No information found. Teratogenic Effects: No information found. Developmental Toxicity: No information found. Reproductive Effects: No information found. 12. Ecological Information Toxicity to fish: LC 50 (Brook trout (Salvelinus fontinalis), 96 h): 0.41 mg/l Toxicity to daphnia and other aquatic invertebrates: EC 50 (Water flea (Daphnia magna), 48 h): 6.15 mg/l Environmental Toxicity: This chemical is expected to cause little oxygen depletion in aquatic systems. PBT and vPvB assessment: This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. 13. Disposal Considerations Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. 14. Transport Information Land Transport DOT USA, TDG Canada & ADR/RID Europe: Not controlled. Sea Transport IMO/IMDG: Not controlled. Air Transport ICAO/IATA: Not controlled. 15. Regulatory Information USA: SARA 311/312 Hazards: See section 2. California Prop.65: Not Listed. 16. Other Information DISCLAIMER: The information and recommendations set forth herein are presented in good faith and believed correct as of the date hereof. It is compiled from various sources, and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules, or insurance requirements applicable. This SDS MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a professionally trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose. This shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship. In no case shall our company be liable to loss or damages by the product user. Specifications of Iron (II) or Ferrous Sulfate or Ferrous Sulphate Heptahydrate, Monohydrate and Anhydrous BP Ph Eur EP JP USP NF IP ACS Analytical Reagent FCC Food grade Manufacturers

Crystal Clear Products and the group companies are manufacturing chemicals since several decades. We have automatic vacuum operated titanium evaporators and SS316 equipments to produce top grade of chemical products. We have toll manufacturers and representatives in China, UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Bangkok Thailand, Kaula Lumpur Malaysia, Dubai UAE etc. & sales representative in Chicago, Houston New York & Los Angeles, USA. Associated units are FDA-GMP certified, Halal and/or Kosher certified, REACH registered, ISO-9001, ISO-22000 HACCP certified, Crisil Rated.

Contact Iron (II) or Ferrous Sulfate or Ferrous Sulphate Heptahydrate, Monohydrate and Anhydrous IP BP Ph Eur EP JP USP NF ACS Analytical Reagent FCC Food Grade manufacturers exporters at:

Crystal Clear Products
Plot No-C1-1031-9, GIDC Estate, Panoli, Ankleshwar, Gujarat - 393002. India
Telephone Mobile: 91-7506449333; e-mail: info@crystalclearproducts.org

e-mail: info@crystalclearproducts.org

Manufacturers, Suppliers of IP BP Ph Eur EP JP USP NF FCC Food, ACS Reagent GMP Grades of Chemicals like Iron (II) or Ferrous Sulfate or Ferrous Sulphate Heptahydrate, Monohydrate and Anhydrous