Plot No-C1-1031-9, GIDC Estate, Panoli, Ankleshwar, Gujarat - 393002. India Telephone Mobile: 91-7506449333; e-mail: info@crystalclearproducts.org

Manganese Bisglycinate ---- Manganese Borogluconate ---- Manganese Chloride ---- Manganese Gluconate ---- Manganese Glycerophosphate ---- Manganese Picolinate ---- Manganese Pidolate ---- Manganese Sulfate ---- Selenious Acid ---- L-selenomitheonine ---- Selenium Glycinate ---- Selenium Metal ---- Stannous Chloride Dihydrate ---- Stannous Fluoride ---- Zinc Acetate ---- Zinc Aspartate ----- Zinc Carbonate ---- Zinc Chloride ---- Zinc Citrate ---- Zinc Gluconate ---- Zinc Glycerophosphate ---- Zinc Glycinate ---- Zinc Lactate ---- Zinc Malate ---- Zinc Oxide ---- Zinc Peroxide ---- Zinc Picolinate ---- Zinc Pidolate ---- Zinc Stearate ---- Zinc Sufate ---- Zinc Undecenoate ---- Potassium Chloride Manufacturer & Exporter

Zinc Chloride Anhydrous Powder Solution Battery Grade Specifications of Commercial Pure & BP Ph Eur USP Analytical Reagent Grade & Zinc Chloride in THF Manufacturers & Exporters Please visit Zinc Chloride Anhydrous Powder Solution Battery Grade USP NF ACS BP Ph Eur EP JP IP Analytical reagent FCC Food grade Manufacturers our associates world class FDA-GMP approved, ISO-9001 Certified facility Anmol Chemicals Zinc Chloride Anhydrous Powder Solution Battery Grade CAS Number 7646-85-7 We offer Free-flowing, Anti-caking Zinc Chloride Anhydrous. Zinc Chloride Pharma Grade or Battery Grade Specifications: Assay: 95-99 % Appearance: Snow-white Ammonia as NH4Cl: 1% max Alkalies and Alkaline Earth: 1% maximum. Iron & Lead: 0.005% maximum. Dry Basis Assay: 99% minimum. Zinc Oxide: 1% maximum. Loss on Drying LOD @ 250C: 1% maximum. Zinc Chloride Solution Lye or Brine Specifications: Assay: 40-42% (It is also offered as 70% Zinc Chloride Solution or as desired by the buyer) Appearance: Water White Liquid Iron & Lead: Less than 10 ppm Specific Gravity: 1.40-1.45 We also manufacture and supply Zinc Chloride Solution in THF. Zinc Chloride USP Grade Specifications: ZnCl2 --- 136.29 Zinc chloride CAS 7646-85-7 DEFINITION Zinc Chloride contains NLT 97.0% and NMT 100.5% of zinc chloride (ZnCl2). IDENTIFICATION A. Identification Tests—General, Zinc: Meets the requirements B. Identification Tests—General, Chloride: Meets the requirements. ASSAY Procedure Sample solution: Dissolve 12 g of Zinc Chloride in 500 mL of water in a 1-L volumetric flask. Add 12 g of ammonium chloride and dilute with water to volume. Analysis: Pipet 25 mL of the Sample solution into a 400-mL beaker. Add 100 mL of water, 10 mL of ammonia–ammonium chloride; buffer, and 1 mL of 0.5 mg/mL of eriochrome black T solution. Titrate with 0.05 M edetate disodium VS to a deep blue endpoint. Each mL of 0.05 M edetate disodium is equivalent to 6.815 mg of zinc chloride (ZnCl2). Acceptance criteria: 97.0%–100.5% Chloride and Sulfate: Sample solution: 1.0 g in 30 mL of water. Acceptance criteria: 20 mL of the Sample solution shows no more sulfate than corresponds to 0.20 mL of 0.020 N sulfuric acid (0.03%). Lead: Standard solution: Add 5 mL of water, 2.50 mL of standard lead solution TS, and 15 mL of Potassium cyanide solution (100 mg/mL) to a similar color-comparison tube. Sample solution: Dissolve 0.50 g in 5 mL of water and transfer the solution to a color-comparison tube. Add 15 mL of Potassium cyanide solution (100 mg/mL), and allow the mixture to become clear. Analysis: To each tube add 0.1 mL of sodium sulfide TS. Mix the contents of each tube and allow to stand for 5 min. Acceptance criteria: Viewed downward over a white surface, the Sample solution is not darker than the Standard solution (NMT 0.005%). Limit of Ammonium Salts: Sample solution: 100 mg/mL Analysis: To 5 mL of Sample solution add 1 N sodium hydroxide until the precipitate first formed is redissolved, then warm the solution. Acceptance criteria: No odor of ammonia is perceptible. Limit of Oxychloride: Sample solution: Dissolve 1.0 g in 20 mL of water and add 20 mL of alcohol. Analysis: To 10 mL of the Sample solution add 0.30 mL of 1.0 N hydrochloric acid. Acceptance criteria: The solution becomes perfectly clear. Alkalies and Alkaline Earths: Sample solution: Dissolve 2.0 g in 150 mL of water contained in a 200-mL volumetric flask. Add sufficient ammonium sulfide to precipitate the zinc completely and dilute with water to volume. Pass through a dry filter and reject the first portion of the filtrate. Analysis: To 100 mL of the Sample solution add 5 drops of sulfuric acid. Evaporate to dryness and ignite. Acceptance criteria: The weight of the residue is NMT 10 mg (1.0%). Packaging and Storage: Preserve in tight containers. Zinc Chloride BP Ph Eur Grade Specifications Zinc Chloride BP ZnCl2 DEFINITION Content: 95.0 per cent to 100.5 per cent. CHARACTERS Appearance: White or almost white, crystalline powder or cast in white or almost white sticks, deliquescent. Solubility: Very soluble in water, freely soluble in ethanol (96 per cent) and in glycerol. IDENTIFICATION A. Dissolve 0.5 g in dilute nitric acid R and dilute to 10 ml with the same acid. The solution gives reaction of chlorides. B. 5 ml of solution S gives the reaction of zinc. TESTS Solution S: To 2.0 g add 38 ml of carbon dioxide-free water R prepared from distilled water and add dilute hydrochloric acid drop wise until dissolution is complete. Dilute to 40 ml with carbon dioxide-free water prepared from distilled water. pH: 4.6 to 5.5. Dissolve 1.0 g in 9 ml of carbon dioxide-free water, ignoring any slight turbidity. Oxychloride: Dissolve 1.5 g in 1.5 ml of carbon dioxide-free water R. The solution is not more opalescent than reference suspension. Add 7.5 ml of ethanol (96 per cent). The solution may become cloudy within 10 min. Any cloudiness disappears on the addition of 0.2 ml of dilute hydrochloric acid. Sulphates: Maximum 200 ppm. Aluminium, calcium, heavy metals, iron, magnesium: To 8 ml of solution S add 2 ml of concentrated ammonia R and shake. The solution is clear and colourless. Add 1 ml of disodium hydrogen phosphate solution. The solution remains clear for at least 5 min. Add 0.2 ml of sodium sulphide solution. A white precipitate is formed and the supernatant liquid remains colourless. Ammonium: Maximum 400 ppm. Zinc Chloride IP Grade (ZnCl2) Specifications: Description: White or practically white, crystalline powder, odorless, very deliquescent Assay: 95.0 - 100.5 pH: Between 4.6 – 6.0 Aluminum, Calcium, Heavy Metals, Iron & Magnesium: Passes the Test Ammonium Salts: Passes the Test Oxychloride: Passes the Test Sulphate: Passes the Test. Zinc Chloride Analytical Reagent Specifications Zinc Chloride ZnCl2 Formula Weight 136.30 CAS Number 7646-85-7 REQUIREMENTS Assay: 97.0% ZnCl2 Zinc Chloride MAXIMUM ALLOWABLE Oxychloride: Passes test Insoluble matter: 0.005% Nitrate (NO3): 0.003% Sulfate (SO4): 0.01% Ammonium (NH4): 0.005% Calcium (Ca): 0.06% Iron (Fe): 0.001% Lead (Pb): 0.005% Magnesium (Mg): 0.01% Potassium (K): 0.02% Sodium (Na): 0.05%. We also offer Zinc Chloride Solution in THF and other solvents. SDS MSDS of Zinc Chloride Anhydrous Powder Solution Battery Grade BP Ph Eur EP JP USP NF IP ACS Analytical Reagent FCC Food grade Manufacturers

Crystal Clear Products and the group companies are manufacturing chemicals since several decades. We have automatic vacuum operated titanium evaporators and SS316 equipments to produce top grade of chemical products. We have toll manufacturers and representatives in China, UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Bangkok Thailand, Kaula Lumpur Malaysia, Dubai UAE etc. & sales representative in Chicago, Houston New York & Los Angeles, USA. Associated units are FDA-GMP certified, Halal and/or Kosher certified, REACH registered, ISO-9001, ISO-22000 HACCP certified, Crisil Rated.

Contact Zinc Chloride Anhydrous Powder Solution Battery Grade IP BP Ph Eur EP JP USP NF ACS Analytical Reagent FCC Food Grade manufacturers exporters at:

Crystal Clear Products
Plot No-C1-1031-9, GIDC Estate, Panoli, Ankleshwar, Gujarat - 393002. India
Telephone Mobile: 91-7506449333; e-mail: info@crystalclearproducts.org

e-mail: info@crystalclearproducts.org

Manufacturers, Suppliers of IP BP Ph Eur EP JP USP NF FCC Food, ACS Reagent GMP Grades of Chemicals like Zinc Chloride Anhydrous Powder Solution Battery Grade & Zinc Chloride in THF