Plot No-C1-1031-9, GIDC Estate, Panoli, Ankleshwar, Gujarat - 393002. India Telephone Mobile: 91-7506449333; e-mail: info@crystalclearproducts.org

Aluminum Chloride Hexahydrate ---- Aluminium Potassium Sulphate ---- Aluminum Chlorohydrate ---- Aluminium Glycinate ---- Aluminium Magnesium Silicate ---- Dried Aluminium Phosphate ---- Dihydroxyaluminum Aminoacetate ---- Dihydroxyaluminum Sodium Carbonate ---- Aluminum Gluconate ---- Aluminum Monostearate & Aluminum Distearate ---- Aluminium Isopropoxide ---- Copper Cupric Chloride ---- Copper Sulfate ---- Ferric Ammonium Citrate ---- Ferric Chloride Hexahydrate ---- Ferric Nitrate Nonahydrate ---- Ferric Oxide ---- Ferric Sulfate ---- Ferrous Fumarate ---- Ferrous Gluconate ---- Ferrous Sulfate ---- Iron Aspartate ---- Iron Sulphide ---- Iron D Saccharate and Iron Sucrose Manufacturer & Exporter

Aluminum Chloride Hexahydrate or Aluminium Chloride Hexahydrate Specifications of Commercial Pure & BP Ph Eur USP Grade Manufacturers & Exporters, also Aluminum Chloride Anhydrous or Aluminium Chloride Anhydrous Please visit Aluminum Chloride Hexahydrate or Aluminium Chloride Hexahydrate USP NF ACS BP Ph Eur EP JP IP Analytical reagent FCC Food grade Manufacturers our associates world class FDA-GMP approved, ISO-9001 Certified facility Anmol Chemicals Aluminum Chloride Hexahydrate or Aluminium Chloride Hexahydrate CAS Number 7784-13-6 Aluminum Chloride Anhydrous or Aluminium Chloride Anhydrous CAS Number 7446-70-0 Specifications of Aluminium Chloride Hexahydrate BP Grade Ph Eur AlCl3-6H2O -- 241.4 -- CAS 7784-13-6 DEFINITION Content: 95.0 per cent to 101.0 per cent. CHARACTERS Appearance: White or slightly yellow, crystalline powder or colourless crystals, deliquescent. Solubility: Very soluble in water, freely soluble in ethanol (96 per cent), soluble in glycerol. IDENTIFICATION A. Dilute 0.1 ml of solution S2 (see Tests) to 2 ml with water. The solution gives reaction of chlorides. B. Dilute 0.3 ml of solution S2 to 2 ml with water. The solution gives the reaction of aluminium. TESTS Solution S1: Dissolve 10.0 g in distilled water and dilute to 100 ml with the same solvent. Solution S2: Dilute 50 ml of solution S1 to 100 ml with water. Appearance of solution: Solution S2 is clear and not more intensely coloured than reference solution. Sulphates: Maximum 100 ppm, determined on solution S1. Iron: Maximum 10 ppm, determined on solution S1. Alkali and alkaline-earth metals: Maximum 0.5 per cent. Heavy metals: Maximum 20 ppm. Water: 42.0 per cent to 48.0 per cent, determined on 50.0 mg. ASSAY Dissolve 0.500 g in 25.0 ml of water. Carry out the complexometric titration of aluminium. Titrate with 0.1 M zinc sulphate until the colour of the indicator changes from greyishgreen to pink. Carry out a blank titration. 1 ml of 0.1 M sodium edetate is equivalent to 24.14 mg of AlCl3-6H2O. Specifications of Aluminum Chloride USP: AlCl3-6H2O --- 241.43 AlCl3 --- 133.34 Aluminum chloride, hexahydrate; Aluminum chloride hexahydrate CAS 7784-13-6 Anhydrous CAS 7446-70-0. DEFINITION Aluminum Chloride contains NLT 95.0% and NMT 102.0% of aluminum chloride (AlCl3), calculated on the anhydrous basis. IDENTIFICATION A. Identification Tests: General, Aluminum ;and ;Chloride. Limit of Sulfate: Sample solution: 10 mg/mL Analysis: Add 0.2 mL of barium chloride to 10 mL of the Sample solution. Acceptance criteria: No turbidity is produced within 1 min. Iron: Sample: 1.0 g Analysis: Dissolve the Sample in 45 mL of water, and add 2 mL of hydrochloric acid. Acceptance criteria: NMT 10 ppm. Limit of Alkalies and Alkaline Earths: Sample: 1.0 g Analysis: To a boiling solution of the Sample in 150 mL of water add a few drops of methyl red, then add 6 N ammonium hydroxide until the color of the solution just changes to a distinct yellow. Add hot water to restore the volume to 150 mL, and filter while hot. Evaporate 75 mL of the filtrate to dryness and ignite to a constant weight. Acceptance criteria: 0.5%; the weight of the residue is NMT 2.5 mg. Water Determination: 42.0% to 48.0%. Specifications of Anhydrous Aluminum Chloride or Aluminum Chloride Anhydrous: Assay: 98.5% minimum. Insoluble matter: 0.4% maximum. pH of 5% solution: 3-4.5 Anhydrous Aluminium Chloride or Aluminum Chloride Anhydrous is available in two forms viz. Powder and Crystals: Particle Size: 0-2 mm for powder and 2-10 mm for crystals. Color: Yellowish-Grey-Greenish Odor: Hydrochloric Acid Odor. SDS MSDS of Aluminum Chloride Hexahydrate or Aluminium Chloride Hexahydrate BP Ph Eur EP JP USP NF IP ACS Analytical Reagent FCC Food grade Manufacturers

Crystal Clear Products and the group companies are manufacturing chemicals since several decades. We have automatic vacuum operated titanium evaporators and SS316 equipments to produce top grade of chemical products. We have toll manufacturers and representatives in China, UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Bangkok Thailand, Kaula Lumpur Malaysia, Dubai UAE etc. & sales representative in Chicago, Houston New York & Los Angeles, USA. Associated units are FDA-GMP certified, Halal and/or Kosher certified, REACH registered, ISO-9001, ISO-22000 HACCP certified, Crisil Rated.

Contact Aluminum Chloride Hexahydrate or Aluminium Chloride Hexahydrate IP BP Ph Eur EP JP USP NF ACS Analytical Reagent FCC Food Grade manufacturers exporters at:

Crystal Clear Products
Plot No-C1-1031-9, GIDC Estate, Panoli, Ankleshwar, Gujarat - 393002. India
Telephone Mobile: 91-7506449333; e-mail: info@crystalclearproducts.org

e-mail: info@crystalclearproducts.org

Manufacturers, Suppliers of IP BP Ph Eur EP JP USP NF FCC Food, ACS Reagent GMP Grades of Chemicals like Aluminum Chloride Hexahydrate or Aluminium Chloride Hexahydrate