Plot No-C1-1031-9, GIDC Estate, Panoli, Ankleshwar, Gujarat - 393002. India Telephone Mobile: 91-7506449333; e-mail: info@crystalclearproducts.org

Acetic Acid Glacial & Solution ---- Acetone ---- Adipic Acid ---- Alginic Acid ---- Arsanilic Acid ---- Ascorbic Acid ---- Aspartic Acid ---- ATMP ---- Benzoic Acid ---- Boric Acid ---- Butyric Acid ---- Caprylic Acid ---- Cinnamic Aldehyde ---- Citric Acid ---- DETA or DTPMP ---- Edetic Acid EDTA ---- Formaldehyde Solution ---- Fumaric Acid ---- Lactobionic Acid ---- Maleic Acid ---- Malic Acid ---- Oleic Acid ---- Propionic Acid ---- Selenious Acid Manufacturer & Exporter

D & L Aspartic Acid SDS MSDS of Manufacturers & Exporters Please visit Aspartic Acid USP NF ACS BP Ph Eur EP JP IP Analytical reagent FCC Food grade Manufacturers our associates world class FDA-GMP approved, ISO-9001 Certified facility Anmol Chemicals D L Aspartic Acid CAS Number 56-84-8 for L-isomer and 1783-96-6 for D-isomer D-Aspartic acid and L-Aspartic acid or L-Aminosuccinic acid, 2-Aminobutanedioic acid SDS Sheet, Safety Data Sheet MSDS, Material Safety Data Sheet 13-Aug-22 1. Product Identification Product Name & Other Names: D-Aspartic acid and L-Aspartic acid or L-Aminosuccinic acid, 2-Aminobutanedioic acid. CAS No.: 56-84-8 L-isomer and 1783-96-6 (D-isomer) EINECS EC Code: 200-291-6 FEMA Number: 3656 Molecular Weight: 133.10 Chemical Formula: HO2CCH2CH(NH2)CO2H or C4H7NO4 Relevant uses and uses advised against (if any): Industrial Manufacturing. SUPPLIER: As per letterhead. 2. Hazards Identification GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910 Classification according to Regulation (EC) No 1272/2008 Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008. This substance is not classified as dangerous according to Directive 67/548/EEC. Labeling according to GHS & Regulation (EC) No 1272/2008 GHS Label Elements NONE Signal Words: None Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapors/spray. P262: Do not get in eyes, on skin, or on clothing. P281: Use personal protective equipment as required. P302+P352 - IF ON SKIN: Wash with plenty of soap and water. P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337+313: If eye irritation persists get medical advice/attention. 3. Composition/Information on Ingredients Product Name & Other Names: D-Aspartic acid and L-Aspartic acid or L-Aminosuccinic acid, 2-Aminobutanedioic acid. CAS No.: 56-84-8 L-isomer and 1783-96-6 (D-isomer) EINECS EC Code: 200-291-6 FEMA Number: 3656 4. First Aid Measures Always seek medical advice after the first aid treatment. Inhalation: If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention. Ingestion: Contact medical center quickly. Never give anything by mouth to an unconscious person. Get medical attention. Skin Contact: Immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse. Eye Contact: Check for and remove any contact lenses. Immediately flush eyes with running water for at least 15 minutes, keeping eyelids open. Cold water may be used. Get medical attention. 5. Fire Fighting Measures Combustible. High heat or direct flame is necessary to cause ignition. Toxic fumes and carbon monoxide and nitrogen oxides may be formed in fire. Explosion: Above the flash point, explosive vapor-air mixtures may be formed. Fire Extinguishing Media: Dry chemical, foam, or carbon dioxide. Do not use a solid stream of water since the stream will scatter and spread the fire. Water spray may be used to keep fire exposed containers cool. Extinguishing Media Not recommended: Avoid using solid water jet as it may scatter the fire. Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used. 6. Accidental Release Measures Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Do not approach facing the wind. Environmental precautions: Do not let the product enter drains, soil, or water sources. Methods and materials used for containment cleanup procedures and Storage: Avoid dust formation. Keep away from heat. Keep away from sources of ignition. Provide ventilation. Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g., sand, earth, diatomaceous earth, vermiculite). Vacuum or sweep-up and remove to an approved disposal container. 7. Handling and Storage Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Conditions for safe storage, including any incompatibilities: Keep away from heat and source of fire. Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Do not breathe dust. Do not leave the material container open. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like oxidizing material. Store in light-resistant containers. Prevent any electrostatic discharge. 8. Exposure Controls/Personal Protection Airborne Exposure Limits: Contains no substances with occupational exposure limit values. Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Personal Respirators (NIOSH Approved): For conditions of use where exposure to the substance is apparent and engineering controls are not feasible, consult an industrial hygienist. Skin Protection: Wear impervious protective clothing, including boots, gloves, lab coat, apron, or coveralls, as appropriate, to prevent skin contact. Eye Protection: Use chemical safety goggles and/or a full-face shield where splashing is possible. Maintain eye wash fountain and quick-drench facilities in work area. Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling. 9. Physical and Chemical Properties Appearance: Almost white crystal or powder. Odor: Not available. Odor threshold: Not available. pH: Not available. Relative density: about 1.7 Melting Point: 270C literature. Initial boiling point and boiling range: 324C decomposes literature. Flash point: Not available. Auto-ignition temperature: No information found. Decomposition temperature: No information found. Upper/lower flammability or explosive limits: No information found. Vapor pressure: No information found. Vapor density: No information found. Evaporation rate: No information found. Flammability (solid, gas): No information found. Partition coefficient: n-octanol/water: No information found. Solubility: Soluble in water. Viscosity: No information found. Molecular Weight: 133.10 Chemical Formula: HO2CCH2CH(NH2)CO2H or C4H7NO4 10. Stability and Reactivity Stability: Stable under ordinary conditions of use and storage. Hazardous Decomposition Products: Carbon dioxide, carbon monoxide, nitrogen oxides and toxic fumes may form when heated to decomposition. Hazardous Polymerization: Not reported. However, it can explode under certain conditions. Incompatibilities: Acids, oxidizing agents, heat, and sparks. Conditions to Avoid: Heat, flames, ignition sources and incompatibles. 11. Toxicological Information Oral rat LD50 >2000 mg/kg. Intraperitoneal mouse LD50 6 g/kg Mutagenic Effects: NA. Teratogenicity: No information found. Reproductive Effects: No information found. Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible, or confirmed human carcinogen by IARC, ACGIH, NTP or OSHA. 12. Ecological Information Toxicity to daphnia and other aquatic invertebrates: static test EC50 - Daphnia magna (Water flea) - 150 mg/l - 48 h. Biodegradability: Readily biodegradable Mobility in soil: Likely to be mobile due to water solubility. Persistence and degradability: Unlikely to persist due to water solubility. Results of PBT and vPvB assessment: No information found. 13. Disposal Considerations Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. 14. Transport Information Land Transport DOT USA, TDG Canada & ADR/RID Europe: Not controlled. Sea Transport IMDG/IMO: Not controlled. Air Transport IATA/ICAO: Not controlled. 15. Regulatory Information USA: California Proposition 65: Not listed. SARA 311/312 Hazards: No SARA hazards. 16. Other Information DISCLAIMER: The information and recommendations set forth herein are presented in good faith and believed correct as of the date hereof. It is compiled from various sources, and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules, or insurance requirements applicable. This SDS MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a professionally trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose. This shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship. In no case shall our company be liable to loss or damages by the product user. Specifications of D L Aspartic Acid BP Ph Eur EP JP USP NF IP ACS Analytical Reagent FCC Food grade Manufacturers

Crystal Clear Products and the group companies are manufacturing chemicals since several decades. We have automatic vacuum operated titanium evaporators and SS316 equipments to produce top grade of chemical products. We have toll manufacturers and representatives in China, UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Bangkok Thailand, Kaula Lumpur Malaysia, Dubai UAE etc. & sales representative in Chicago, Houston New York & Los Angeles, USA. Associated units are FDA-GMP certified, Halal and/or Kosher certified, REACH registered, ISO-9001, ISO-22000 HACCP certified, Crisil Rated.

Contact D L Aspartic Acid IP BP Ph Eur EP JP USP NF ACS Analytical Reagent FCC Food Grade manufacturers exporters at:

Crystal Clear Products
Plot No-C1-1031-9, GIDC Estate, Panoli, Ankleshwar, Gujarat - 393002. India
Telephone Mobile: 91-7506449333; e-mail: info@crystalclearproducts.org

e-mail: info@crystalclearproducts.org

Manufacturers, Suppliers of IP BP Ph Eur EP JP USP NF FCC Food, ACS Reagent GMP Grades of Chemicals like D L Aspartic Acid