Crystal Clear Products Ankleshwar India
Plot No-C1-1031-9, GIDC Estate, Panoli, Ankleshwar, Gujarat - 393002. India
Telephone Mobile: 91-7506449333; e-mail: info@crystalclearproducts.org

Home

Acetic Acid Glacial & Solution ---- Acetone ---- Adipic Acid ---- Alginic Acid ---- Arsanilic Acid ---- Ascorbic Acid ---- Aspartic Acid ---- ATMP ---- Benzoic Acid ---- Boric Acid ---- Butyric Acid ---- Caprylic Acid ---- Cinnamic Aldehyde ---- Citric Acid ---- DETA or DTPMP ---- Edetic Acid EDTA ---- Formaldehyde Solution ---- Fumaric Acid ---- Lactobionic Acid ---- Maleic Acid ---- Malic Acid ---- Oleic Acid ---- Propionic Acid ---- Selenious Acid

PalletizedDrumSea Cargo ExportAir Cargo Export
Manufacturer & Exporter

Edetic Acid EDTA SDS MSDS of Manufacturers & Exporters

Please visit Edetic Acid EDTA USP NF ACS BP Ph Eur EP JP IP Analytical reagent FCC Food grade Manufacturers our associates world class FDA-GMP approved, ISO-9001 Certified facility Anmol Chemicals

Edetic Acid EDTA Suppliers Manufacturers
Edetic Acid EDTA CAS Number 60-00-4

EDTA or Edetic Acid SDS, Safety Data Sheet
Ethylenediaminetetraacetic acid MSDS, Material Safety Data Sheet
14-Aug-22

1. Product Identification

Product Name & Other Names: EDTA or Edetic acid or Versene acid or Ethylenediaminetetraacetic acid.
CAS Number: 60-00-4
EINECS EC Number: 200-449-4
Molecular Weight:
292.24
Chemical Formula: (HOCOCH2)2NCH2CH2N- (HOCOCH2)2
Relevant uses and uses advised against (if any): For Industrial use only.
Supplier: As per letterhead.

2. Hazards Identification

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Acute toxicity, oral Category 5, H303
Serious eye damage/eye irritation Category 1, H319
Hazardous to the aquatic environment, acute hazard Category 3 H402

Labeling according to GHS USA & Regulation (EC) No 1272/2008

GHS Label Elements
Irritant
Irritant

Signal Words: Warning

Hazard statements:
H303: May be harmful if swallowed
H319: Causes serious eye irritation.
H402: Harmful to aquatic life.

Precautionary statements:
P262: Do not get in eyes, on skin, or on clothing.
P264: Wash skin thoroughly after handling.
P330: Rinse mouth.
P270: Do not eat, drink, or smoke when using this product.
P273: Avoid release to the environment.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P301+312: IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell.
P302+P352-IF ON SKIN: Wash with plenty of soap and water.
P304+P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305+351+338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do – continue rinsing.
P337+P313: If eye irritation persists: Get medical advice/ attention.

3. Composition/Information on Ingredients

Product Name & Other Names: EDTA or Edetic acid or Versene acid or Ethylenediaminetetraacetic acid.
CAS Number: 60-00-4
EINECS EC Number: 200-449-4

4. First Aid Measures

Always seek medical advice after the first aid treatment.

Inhalation: Remove to fresh air. If breathing is difficult, give oxygen. Get Medical advice.
Ingestion: Give several glasses of water to drink to dilute the effect and get medical advice.
Skin Contact: Remove any contaminated clothing and shoes. Wash soap or mild detergent and water for at least 15 minutes. Get medical attention.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention.

5. Fire Fighting Measures

Fire: Not considered to be a fire hazard. However, it can burn at high temperatures.
Explosion: Not considered to be an explosion hazard.
Fire Extinguishing Media: Use any means suitable for extinguishing surrounding fire.
Extinguishing Media Not recommended: Avoid using solid water jet as it may scatter the fire.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used.

6. Accidental Release Measures

Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment cleanup procedures and Storage: Do not inhale dust, vapors, mist, or gas. Avoid dust formation. Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g., sand, earth, diatomaceous earth, vermiculite). Use a shovel to put the material into a convenient waste disposal container.

7. Handling and Storage

Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents, strong bases, aluminum, copper, copper alloys, nickel.

8. Exposure Controls/Personal Protection

Airborne Exposure Limits: None established.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator (NIOSH type N95 or better filters) may be worn.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice.

9. Physical and Chemical Properties

Appearance: EDTA is white crystals.
Odor: Odorless.
Odor threshold: Not available.
pH: Not available.
Relative density: around 0.9
Melting Point: 250C (483F).
Initial boiling point and boiling range: Not available.
Flash point: Not available.
Auto-ignition temperature: No information found.
Decomposition temperature: No information found.
Upper/lower flammability or explosive limits: No information found.
Vapor pressure: No information found.
Vapor density: No information found.
Evaporation rate: No information found.
Flammability (solid, gas): No information found.
Partition coefficient: n-octanol/water: No information found.
Solubility: 0.05 g/100 ml @ 20C (68F)
Viscosity: No information found.
Molecular Weight: 292.24
Chemical Formula: HOCOCH2)2NCH2CH2N- (HOCOCH2)2

10. Stability and Reactivity

Stability: Stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: Burning may produce carbon monoxide, carbon dioxide, nitrogen oxides.
Hazardous Polymerization: Will not occur.
Incompatibilities: Oxidizing agents, strong bases, aluminum, copper, copper alloys, nickel.
Conditions to Avoid: Incompatibles, heat, and sunlight.

11. Toxicological Information

Oral LD50 Rat: >2000 mg/kg.
Dermal LD50 Rabbit: >5000 mg/kg
Carcinogenicity: Not reported human as a carcinogen by IARC, ACGIH, OSHA and NTP.
Teratogenic Effects: No information found.
Mutagenic Effects: No information found.
Developmental Toxicity: No information found.
Reproductive Effects: No information found.

12. Ecological Information

Environmental Fate: When released into the soil, it is expected to leach into groundwater. When released into the soil, this material may biodegrade to a moderate extent. When released into the soil, this material is not expected to evaporate significantly. When released into water, this material is not expected to evaporate significantly. This material is not expected to significantly bio accumulate. When released into the air, this material is expected to be readily degraded.
Environmental Toxicity:
24 Hr. LC50 rainbow trout: 340 mg/L;
96 Hr. LC50 bluegill sunfish:486 mg/L;
96 Hr. LC50 channel catfish: 129 mg/L.

13. Disposal Considerations

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility.

14. Transport Information

Land Transport DOT USA, TDG Canada & ADR/RID Europe: Not controlled.
Sea Transport IMDG/IMO: Not controlled.
Air Transport IATA/ICAO: Not controlled.

15. Regulatory Information

SARA 311/312 Hazards: Acute Health Hazard.
California Prop 65: Not listed to cause cancer, birth defects, or any other reproductive harm.

Section 16 - Additional Information

DISCLAIMER: The information and recommendations set forth herein are presented in good faith and believed correct as of the date hereof. It is compiled from various sources, and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules, or insurance requirements applicable. This SDS MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a professionally trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose. This shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship. In no case shall our company be liable to loss or damages by the product user.

Specifications of Edetic Acid EDTA BP Ph Eur EP JP USP NF IP ACS Analytical Reagent FCC Food grade Manufacturers

Crystal Clear Products and the group companies are manufacturing chemicals since several decades. We have automatic vacuum operated titanium evaporators and SS316 equipments to produce top grade of chemical products. We have toll manufacturers and representatives in China, UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Bangkok Thailand, Kaula Lumpur Malaysia, Dubai UAE etc. & sales representative in Chicago, Houston New York & Los Angeles, USA. Associated units are FDA-GMP certified, Halal and/or Kosher certified, REACH registered, ISO-9001, ISO-22000 HACCP certified, Crisil Rated.

Contact Edetic Acid EDTA IP BP Ph Eur EP JP USP NF ACS Analytical Reagent FCC Food Grade manufacturers exporters at:

Crystal Clear Products Logo

Crystal Clear Products
Plot No-C1-1031-9, GIDC Estate, Panoli, Ankleshwar, Gujarat - 393002. India
Telephone Mobile: 91-7506449333; e-mail: info@crystalclearproducts.org

e-mail: info@crystalclearproducts.org

Manufacturers, Suppliers of IP BP Ph Eur EP JP USP NF FCC Food, ACS Reagent GMP Grades of Chemicals like Edetic Acid EDTA