Plot No-C1-1031-9, GIDC Estate, Panoli, Ankleshwar, Gujarat - 393002. India Telephone Mobile: 91-7506449333; e-mail: info@crystalclearproducts.org

Acetic Acid Glacial & Solution ---- Boric Acid ---- Erythorbic Acid ---- Formaldehyde Solution ---- Formic Acid ---- Fumaric Acid ---- Gallic Acid ---- Gluconic Acid ---- Glutaraldehyde ---- Glycerophosphoric Acid ---- HEDP ---- Hyaluronic Acid ---- Lactic Acid ---- Lactobionic Acid ---- Lauric Acid or Dodecanoic Acid ---- Maleic Acid ---- Malic Acid ---- Maltobionic Acid ---- Myristic Acid ---- Oleic Acid ---- Orotic Acid ---- Peracetic Acid ---- Propionic Acid ---- Selenious Acid Manufacturer & Exporter

Hyaluronic Acid SDS MSDS of Manufacturers & Exporters Please visit Hyaluronic Acid GMP grade Manufacturers our associates world class FDA-GMP approved, ISO-9001 Certified facility Anmol Chemicals Hyaluronic Acid CAS Number 9004-61-9 Hyaluronic Acid or hyaluronan SDS GHS, Safety Data Sheet MSDS, Material Safety Data Sheet 16-Aug-22 Section 1: Chemical Product and Company Identification Product Name & Other Names: Hyaluronic Acid or hyaluronan CAS Number: 9004-61-9 EINECS EC Number: 232-678-0 Molecular Formula: (C14H21NO11)n Molecular Weight: Varies Relevant uses and uses advised against (if any): Industrial Manufacturing. Suppliers: As per letterhead. Section 2: Hazards Identification GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910 Hazard Class and Category Code(s), Regulation (EC) No 1272/2008 (CLP) Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008. This substance is not classified as dangerous according to Directive 67/548/EEC. Labeling Regulation as per GHS & EC 1272/2008 (CLP) & GHS GHS Label Elements NONE Signal Word: None Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapors/spray. P262: Do not get in eyes, on skin, or on clothing. P281: Use personal protective equipment as required. P302+P352 - IF ON SKIN: Wash with plenty of soap and water. P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337+313: If eye irritation persists get medical advice/attention. Section 3: Composition and Information on Ingredients Product Name & Other Names: Hyaluronic Acid or hyaluronan CAS Number: 9004-61-9 EINECS EC Number: 232-678-0 Section 4: First Aid Measures Always seek medical advice after the first aid treatment. Skin: Rinse with water. Soap may be used. Seek Medical Aid. Eyes: Wash eyes with plenty of water for at least 15 minutes, lifting lids occasionally. Seek Medical Aid. Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Ingestion: If swallowed, induce vomiting immediately after giving two glasses of water. Never give anything by mouth to an unconscious person. Section 5: Fire and Explosion Data Flammability of the Product: Non-flammable. Products of Combustion: Oxides of Carbon. Fire Fighting Media and Instructions: Use water spray, alcohol-resistant foam, dry chemical, or carbon dioxide. Wear self-contained breathing apparatus for firefighting if necessary. Extinguishing Media Not recommended: Avoid using solid water jet as it may scatter the fire. Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used. Section 6: Accidental Release Measures Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Ensure adequate ventilation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).Do not approach facing the wind. Environmental precautions: Do not let the product enter drains, soil, or water sources. Methods and materials used for containment cleanup procedures and Storage: Contain spilled material. Do not inhale vapors, mist, or gas. Avoid dust formation. Use a shovel to put the material into a convenient waste disposal container. Section 7: Handling and Storage Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Do not leave the material container open. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like oxidizing agents, acids, and bases. Section 8: Exposure Controls/Personal Protection Exposure Limits: This product does not contain any hazardous materials with occupational exposure limits established by the region-specific regulatory bodies. There is a blanket recommendation of 10 mg/m3 for inspirable dusts or mists when limits have not otherwise been established. Engineering Controls: Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits. Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. Skin Protection: Wear protective gloves and clean body-covering clothing. Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area. Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling. Section 9: Physical and Chemical Properties Physical state and appearance: Solid off-white to crystals powder or granules. Odor: None. Odor threshold: Not available. pH: Not available. Relative density: Not available. Melting point/freezing point: Not available. Initial boiling point and boiling range: Not available. Flash point: Not available. Auto-ignition temperature: No information found. Decomposition temperature: No information found. Upper/lower flammability or explosive limits: No information found. Vapor pressure: No information found. Vapor density: No information found. Evaporation rate: No information found. Flammability (solid, gas): No information found. Partition coefficient: n-octanol/water: No information found. Solubility(ies): No information found. Viscosity: No information found. Molecular Formula: (C14H21NO11)n Molecular Weight: Varies. Section 10: Stability and Reactivity Data Stability: It is stable in room temperature in closed containers under normal storage & handling. Conditions of instability: Incompatible materials, Heat. Incompatibility with various substances: Avoid high temperatures, sparks, open flames, and heat. Avoid contact with strong oxidizing agents, acids, and bases. Polymerization: Will not occur. Section 11: Toxicological Information LD50 Oral - Rat - > 800 mg/kg. Carcinogenic Effects: Not a reported carcinogen by IARC, NTP, ACGIH, OSHA. Mutagenic Effects: No information found. Developmental Toxicity: No information found. Reproductive Effects: No information found. Section 12: Ecological Information Toxicity to fish: No information found. Persistence and Degradability: No information found. Mobility: No information found. Bioaccumulation/ Accumulation: No information found. Results of PBT and vPvB assessment: No information found. Section 13: Disposal Considerations Waste Disposal: Waste must be disposed of in accordance with federal, state, and local environmental control regulations. Section 14: Transport Information Land Transport DOT USA, TDG Canada & ADR/RID Europe: Not controlled. Sea Transport IMO/IMDG: Not controlled. Air Transport ICAO/IATA: Not controlled. Section 15: Other Regulatory Information USA Regulations: SARA 311/312 Hazard Categories: No SARA hazards California Prop 65: Not listed. Section 16 - Additional Information DISCLAIMER: The information and recommendations set forth herein (hereinafter "Information") are presented in good faith and believed correct as of the date hereof. It is compiled from various sources, and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules, or insurance requirements applicable. This SDS MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a professionally trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose. This shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship. In no case shall our company be liable to loss or damages by the product user. Specifications of Hyaluronic Acid GMP Food grade Manufacturers

Crystal Clear Products and the group companies are manufacturing chemicals since several decades. We have automatic vacuum operated titanium evaporators and SS316 equipments to produce top grade of chemical products. We have toll manufacturers and representatives in China, UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Bangkok Thailand, Kaula Lumpur Malaysia, Dubai UAE etc. & sales representative in Chicago, Houston New York & Los Angeles, USA. Associated units are FDA-GMP certified, Halal and/or Kosher certified, REACH registered, ISO-9001, ISO-22000 HACCP certified, Crisil Rated.

Contact Hyaluronic Acid IP BP Ph Eur EP JP USP NF ACS Analytical Reagent FCC Food Grade manufacturers exporters at:

Crystal Clear Products
Plot No-C1-1031-9, GIDC Estate, Panoli, Ankleshwar, Gujarat - 393002. India
Telephone Mobile: 91-7506449333; e-mail: info@crystalclearproducts.org

e-mail: info@crystalclearproducts.org

Manufacturers, Suppliers of IP BP Ph Eur EP JP USP NF FCC Food, ACS Reagent GMP Grades of Chemicals like Hyaluronic Acid