Plot No-C1-1031-9, GIDC Estate, Panoli, Ankleshwar, Gujarat - 393002. India Telephone Mobile: 91-7506449333; e-mail: info@crystalclearproducts.org

Acetic Acid Glacial & Solution ---- Boric Acid ---- Erythorbic Acid ---- Formaldehyde Solution ---- Formic Acid ---- Fumaric Acid ---- Gallic Acid ---- Gluconic Acid ---- Glutaraldehyde ---- Glycerophosphoric Acid ---- HEDP ---- Hyaluronic Acid ---- Lactic Acid ---- Lactobionic Acid ---- Lauric Acid or Dodecanoic Acid ---- Maleic Acid ---- Malic Acid ---- Maltobionic Acid ---- Myristic Acid ---- Oleic Acid ---- Orotic Acid ---- Peracetic Acid ---- Propionic Acid ---- Selenious Acid Manufacturer & Exporter

Myristic acid or Tetradecanoic acid or 1-Tridecanecarboxylic acid SDS MSDS of Manufacturers & Exporters Please visit Myristic acid or Tetradecanoic acid USP NF ACS BP Ph Eur EP JP IP Analytical reagent FCC Food grade Manufacturers our associates world class FDA-GMP approved, ISO-9001 Certified facility Anmol Chemicals Myristic acid or Tetradecanoic acid or or 1-Tridecanecarboxylic acid CAS Number 544-63-8 Myristic acid or Tetradecanoic acid SDS GHS, Safety Data Sheet MSDS Sheet 16-August-22 Section 1: Chemical Product and Company Identification Product Name & Other Names: Myristic acid or Tetradecanoic acid or 1-Tridecanecarboxylic acid. CAS Number: 544-63-8 EINECS EC Code: 208-875-2 or 250-924-5 Relevant uses and uses advised against (if any): Industrial Manufacturing. Suppliers: As per letterhead. Section 2: Hazards Identification GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910 Hazard Class and Category Code(s), Regulation (EC) No 1272/2008 (CLP) Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008. This substance is not classified as dangerous according to Directive 67/548/EEC. Labeling Regulation as per GHS & EC 1272/2008 (CLP) & GHS GHS Label Elements NONE Signal Word: None Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapors/spray. P262: Do not get in eyes, on skin, or on clothing. P281: Use personal protective equipment as required. P302+P352 - IF ON SKIN: Wash with plenty of soap and water. P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337+313: If eye irritation persists get medical advice/attention. Section 3: Composition and Information on Ingredients Product Name & Other Names: Myristic acid or Tetradecanoic acid or 1-Tridecanecarboxylic acid. CAS Number: 544-63-8 EINECS EC Code: 208-875-2 or 250-924-5 Section 4: First Aid Measures Always seek medical advice after the first aid treatment. Skin: Rinse with water. Soap may be used. Seek Medical Aid. Eyes: Wash eyes with plenty of water for at least 15 minutes, lifting lids occasionally. Seek Medical Aid. Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Ingestion: If swallowed, induce vomiting immediately after giving two glasses of water. Never give anything by mouth to an unconscious person. Section 5: Fire and Explosion Data Flash point: >100C. Flammability of the Product: Non-flammable. However, it will burn at high temperature. Products of Combustion: Fumes and Oxides of Carbon. Fire Fighting Media and Instructions: Use water spray, alcohol-resistant foam, dry chemical, or carbon dioxide. Wear self-contained breathing apparatus for firefighting if necessary. Extinguishing Media Not recommended: Avoid using solid water jet as it may scatter the fire. Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used. Section 6: Accidental Release Measures Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc). Do not approach facing the wind. Environmental precautions: Do not let the product enter drains, soil, or water sources. Methods and materials used for containment cleanup procedures and Storage: Contain spilled material. Do not inhale vapors, mist, or gas. Avoid dust formation. Use a shovel to put the material into a convenient waste disposal container. Section 7: Handling and Storage Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc). Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Do not leave the material container open. Store protected from heat, sparks and ignition sources and incompatible materials. Do not store with incompatible materials like oxidizing agents, strong reducing agents, bases, and acids. Storage temperature: -20C. Section 8: Exposure Controls/Personal Protection Occupational Exposure Limits: No exposure limits known for ingredient. Engineering Controls: Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits. Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. Skin Protection: Wear protective gloves and clean body-covering clothing. Eye Protection: Use chemical safety goggles and/or full-face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area. Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice. Section 9: Physical and Chemical Properties Physical state and appearance: White powder or flakes. Odor: Not available. Odor threshold: Not available. pH: Not available. Relative density: around 0.9 Melting point/freezing point: 48C to 55C. Initial boiling point and boiling range: 326C. Flash point: >100C. Auto-ignition temperature: No informations found. Decomposition temperature: No informations found. Upper/lower flammability or explosive limits: No informations found. Vapor pressure: No informations found. Vapor density: No informations found. Evaporation rate: No informations found. Flammability (solid, gas): No informations found. Partition coefficient: n-octanol/water: No informations found. Solubility: Soluble in alcohol, methanol, ether, petroleum ether, benzene, chloroform. Viscosity: No informations found. Molecular Formula: C14H28O2 or CH3(CH2)12COOH Molecular Weight: 228.37 Section 10: Stability and Reactivity Data Stability: It is stable in room temperature in closed containers under normal storage & handling. Conditions of instability: Incompatible materials, heat flame Incompatibility with various substances: Avoid high temperatures, sparks, open flames, and moisture. Avoid contact with strong oxidizing agents, strong reducing agents, bases, and acids. Polymerization: Will not occur. Section 11: Toxicological Information LD50 Oral - Rat - > 10000 mg/kg. Carcinogenic Effects: Not a reported carcinogen by IARC, NTP, ACGIH, OSHA. Mutagenic Effects: No informations found. Developmental Toxicity: No informations found. Reproductive Effects: No informations found. Section 12: Ecological Information Toxicity to fish: LC50 Oryzias latipes (Orange-red killifish): 118 mg/l; 96 h. Products of Biodegradation: No informations found. Ecotoxicity: Not regarded as dangerous for the environment. However, large, or frequent spills may have hazardous effects on the environment. Persistence and Degradability: Not likely to persist. Mobility: No informations found. Bioaccumulation/ Accumulation: Degradable. Results of PBT and vPvB assessment: No informations found. Section 13: Disposal Considerations Waste Disposal: Waste must be disposed of in accordance with federal, state, and local environmental control regulations. Section 14: Transport Information DOT USA, TDG Canada & ADR/RID Europe: Not controlled. IMDG/IMO: Not controlled. IATA: Not controlled. Section 15: Other Regulatory Information USA Regulations: SARA 311/312 Hazard Categories: No SARA hazards. California Prop 65: Not listed. Section 16 - Additional Information DISCLAIMER: The information and recommendations set forth herein (hereinafter "Information") are presented in good faith and believed correct as of the date hereof. It is compiled from various sources, and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules, or insurance requirements applicable. This MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a professionally trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose. Specifications of Myristic acid or Tetradecanoic acid BP Ph Eur EP JP USP NF IP ACS Analytical Reagent FCC Food grade Manufacturers

Crystal Clear Products and the group companies are manufacturing chemicals since several decades. We have automatic vacuum operated titanium evaporators and SS316 equipments to produce top grade of chemical products. We have toll manufacturers and representatives in China, UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Bangkok Thailand, Kaula Lumpur Malaysia, Dubai UAE etc. & sales representative in Chicago, Houston New York & Los Angeles, USA. Associated units are FDA-GMP certified, Halal and/or Kosher certified, REACH registered, ISO-9001, ISO-22000 HACCP certified, Crisil Rated.

Contact Myristic acid or Tetradecanoic acid or 1-Tridecanecarboxylic acid IP BP Ph Eur EP JP USP NF ACS Analytical Reagent FCC Food Grade manufacturers exporters at:

Crystal Clear Products
Plot No-C1-1031-9, GIDC Estate, Panoli, Ankleshwar, Gujarat - 393002. India
Telephone Mobile: 91-7506449333; e-mail: info@crystalclearproducts.org

e-mail: info@crystalclearproducts.org

Manufacturers, Suppliers of IP BP Ph Eur EP JP USP NF FCC Food, ACS Reagent GMP Grades of Chemicals like Myristic acid or Tetradecanoic acid or 1-Tridecanecarboxylic acid