Plot No-C1-1031-9, GIDC Estate, Panoli, Ankleshwar, Gujarat - 393002. India Telephone Mobile: 91-7506449333; e-mail: info@crystalclearproducts.org

Soda Lime ---- Sodium Acetate ---- Sodium Adipate ---- Sodium Alginate ---- Sodium Ascorbate ---- Sodium Benzoate ---- Sodium Bicarbonate ---- Sodium Bisulfate ---- Sodium Borate, Borax ---- Sodium Bromate ---- Sodium Bromide ---- Sodium Butyl Paraben ---- Sodium Butyrate ---- Sodium Caprylate ---- Sodium Chloride ---- Sodium Citrate ---- Sodium Diacetate ---- Sodium Erythorbate -- Sodium Ethyl Paraben ---- Sodium Formate ---- Sodium Gluconate ---- Sodium Glycerophosphate ---- Sodium Formaldehyde Bisulfite ---- Sodium Hyaluronate ---- Sodium Hydroxide ---- Sodium Lactate ---- Sodium Lactobionate ---- Sodium Lauryl Sulfate ---- Sodium Methyl Paraben ---- Sodium Metabisulfite ---- Sodium Molybdate ---- Sodium Nitrate ---- Sodium Nitrite ---- Sodium Oleate ---- Sodium Perborate ---- Sodium Persulfate ---- Sodium Phosphate Monobasic ---- Sodium Phosphate Dibasic ---- Sodium Phosphate Tribasic ---- Sodium Picosulfate ---- Sodium Propyl Paraben ---- Sodium Propionate ---- Sodium Saccharin ---- Sodium Selenate ---- Sodium Selenite ---- Sodium Stibogluconate ---- Sodium Sulfate ---- Sodium Sulfide Nonahydrate ---- Sodium Tartrate ---- Sodium Thiosulfate ---- Benzyl Benzoate ---- Selenious Acid Manufacturer & Exporter

Sodium Alginate SDS MSDS of Manufacturers & Exporters Please visit Sodium Alginate USP NF ACS BP Ph Eur EP JP IP Analytical reagent FCC Food grade Manufacturers our associates world class FDA-GMP approved, ISO-9001 Certified facility Anmol Chemicals Sodium Alginate CAS Number 9005-38-3 Sodium Alginate SDS, Material Safety Data Sheet MSDS, Material Safety Data Sheet 03-July-22 1. PRODUCT IDENTIFICATION Product Name & Other Names: Algin, Alginic acid sodium salt. CAS No.: 9005-38-3 EINECS EC Number: - Molecular Weight: Varies Chemical Formula: (C6H7O6Na)n Relevant uses and uses advised against (if any): Industrial Manufacturing. Suppliers: As per letterhead. 2. HAZARD IDENTIFICATION GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910 Classification according to Regulation (EC) No 1272/2008 Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008. This substance is not classified as dangerous according to Directive 67/548/EEC. Labeling according to GHS & Regulation (EC) No 1272/2008 GHS Label Elements None Signal Words: None Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapors/spray. P262: Do not get in eyes, on skin, or on clothing. P281: Use personal protective equipment as required. P302+P352 - IF ON SKIN: Wash with plenty of soap and water. P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337+313: If eye irritation persists get medical advice/attention. 3. COMPOSITION/INFORMATION ON INGREDIENTS Product Name & Other Names: Algin, Alginic acid sodium salt. CAS No.: 9005-38-3 EINECS EC Number: - 4. FIRST AID MEASURES Always get medical attention after the first aid is over. Emergency and First Aid Procedures: Eyes - Flush with water for at least 15 minutes, raising and lowering eyelids occasionally. Get medical attention if irritation persists. Skin - Thoroughly wash exposed area for at least 15 minutes. Remove contaminated clothing. Launder contaminated clothing before reuse. Get medical attention if irritation persists. Ingestion - swallowed, if conscious, give plenty of water. Immediately call a physician. Never give anything by mouth to an unconscious person. Inhalation - Remove to fresh air. Give oxygen if breathing is difficult; give artificial respiration if breathing has stopped. Get medical attention. 5. FIREFIGHTING PROCEDURES Extinguisher Media: Use media suitable to extinguish surrounding fire. Use water spray, alcohol-resistant foam, dry chemical, or carbon dioxide. Flammable Limits in Air % by Volume: N/A Special Fire fighting Procedures: Firefighters should wear full protective equipment and NIOSH approved self-contained breathing apparatus. Extinguishing Media Not recommended: Avoid using solid water jet as it may scatter the fire. Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used. Uninvolved persons should evacuate to a safe place. 6. SPILL OR LEAK PROCEDURES Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Ensure adequate ventilation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind. Do not touch the spilled material. Environmental precautions: Do not let the product enter drains, soil, or water sources. Methods and materials used for containment Cleanup procedures and Storage: Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite). Vacuum or sweep-up and remove to an approved disposal container. 7. SPECIAL PRECAUTIONS Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces. Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Do not leave the material container open. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents, Strong acids, and bases. 8. SPECIAL PROTECTION INFORMATION Exposure Limits: This product does not contain any hazardous materials with occupational exposure limits established by the region-specific regulatory bodies. There is a blanket recommendation of 10 mg/m3 for inspirable dusts or mists when limits have not otherwise been established. Respiratory Protection: None needed under normal conditions of use with adequate ventilation. NIOSH approved equipment should be worn if PELs are exceeded. Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area. Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator. Skin Protection: Wear protective gloves and clean body-covering clothing. Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area. Other Control Measures: Maintain good housekeeping in work area. Dust deposits on floors and other surfaces may pick up moisture and cause the surfaces to become slippery and present safety hazards. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling. 9. PHYSICAL DATA Appearance and Odor: It is beige powder, odorless Odor: Not available. Odor threshold: Not available. pH: Not available. Relative density: Not available. Melting point/freezing point: Not available. Initial boiling point and boiling range: Not available. Flash point: No information found. Auto-ignition temperature: No information found. Decomposition temperature: No information found. Upper/lower flammability or explosive limits: No information found. Vapor pressure: No information found. Vapor density: No information found. Evaporation rate: No information found. Flammability (solid, gas): No information found. Partition coefficient: n-octanol/water: No information found. Solubility in Water: Soluble. Viscosity: No information found. Molecular Weight: Varies Chemical Formula: (C6H7O6Na)n 10. REACTIVITY DATA Stability: Stable under ordinary conditions of usage and storage. Conditions to Avoid: Heat, humidity, Dust generation. Incompatibility (Materials to Avoid): Strong oxidizing agents, Strong acids and bases. Hazardous Decomposition Products: Carbon monoxide, carbon dioxide Hazardous Polymerization: Will not occur. 11. TOXICITY DATA Toxicity Data: LD50 Oral - Rat - > 5,000 mg/kg(Alginic acid, sodium salt) Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC, NTP, ACGIH & OSHA. Mutagenic Effects: No information found. Developmental Toxicity: No information found. Reproductive Effects: No information found. 12. ECOLOGICAL DATA Toxicity to fish: No information found. Bioaccumulative potential: Does not bioaccumulate. Results of PBT and vPvB assessment: This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. 13. DISPOSAL INFORMATION Waste Disposal Methods: Dispose in accordance with all applicable Federal, State and Local regulations. 14. TRANSPORT INFORMATION Land Transport DOT USA, TDG Canada & ADR/RID Europe: Not controlled. Sea Transport IMDG/IMO: Not controlled. Air Transport ICAO/IATA: Not controlled. 15. REGULATORY INFORMATION USA: SARA 311/312 Hazards: See section 2. California Prop 65 Components: This product does not contain any chemicals known to the State of California to cause cancer, birth, or any other reproductive defects. 16. ADDITIONAL INFORMATION DISCLAIMER: The information and recommendations set forth herein are presented in good faith and believed correct as of the date hereof. It is compiled from various sources, and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules, or insurance requirements applicable. This SDS MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a professionally trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose. This shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship. In no case shall our company be liable to loss or damages by the product user. Specifications of Sodium Alginate BP Ph Eur EP JP USP NF IP ACS Analytical Reagent FCC Food grade Manufacturers

Crystal Clear Products and the group companies are manufacturing chemicals since several decades. We have automatic vacuum operated titanium evaporators and SS316 equipments to produce top grade of chemical products. We have toll manufacturers and representatives in China, UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Bangkok Thailand, Kaula Lumpur Malaysia, Dubai UAE etc. & sales representative in Chicago, Houston New York & Los Angeles, USA. Associated units are FDA-GMP certified, Halal and/or Kosher certified, REACH registered, ISO-9001, ISO-22000 HACCP certified, Crisil Rated.

Contact Sodium Alginate IP BP Ph Eur EP JP USP NF ACS Analytical Reagent FCC Food Grade manufacturers exporters at:

Crystal Clear Products
Plot No-C1-1031-9, GIDC Estate, Panoli, Ankleshwar, Gujarat - 393002. India
Telephone Mobile: 91-7506449333; e-mail: info@crystalclearproducts.org

e-mail: info@crystalclearproducts.org

Manufacturers, Suppliers of IP BP Ph Eur EP JP USP NF FCC Food, ACS Reagent GMP Grades of Chemicals like Sodium Alginate