Plot No-C1-1031-9, GIDC Estate, Panoli, Ankleshwar, Gujarat - 393002. India Telephone Mobile: 91-7506449333; e-mail: info@crystalclearproducts.org

Soda Lime ---- Sodium Acetate ---- Sodium Adipate ---- Sodium Alginate ---- Sodium Ascorbate ---- Sodium Benzoate ---- Sodium Bicarbonate ---- Sodium Bisulfate ---- Sodium Borate, Borax ---- Sodium Bromate ---- Sodium Bromide ---- Sodium Butyl Paraben ---- Sodium Butyrate ---- Sodium Caprylate ---- Sodium Chloride ---- Sodium Citrate ---- Sodium Diacetate ---- Sodium Erythorbate -- Sodium Ethyl Paraben ---- Sodium Formate ---- Sodium Gluconate ---- Sodium Glycerophosphate ---- Sodium Formaldehyde Bisulfite ---- Sodium Hyaluronate ---- Sodium Hydroxide ---- Sodium Lactate ---- Sodium Lactobionate ---- Sodium Lauryl Sulfate ---- Sodium Methyl Paraben ---- Sodium Metabisulfite ---- Sodium Molybdate ---- Sodium Nitrate ---- Sodium Nitrite ---- Sodium Oleate ---- Sodium Perborate ---- Sodium Persulfate ---- Sodium Phosphate Monobasic ---- Sodium Phosphate Dibasic ---- Sodium Phosphate Tribasic ---- Sodium Picosulfate ---- Sodium Propyl Paraben ---- Sodium Propionate ---- Sodium Saccharin ---- Sodium Selenate ---- Sodium Selenite ---- Sodium Stibogluconate ---- Sodium Sulfate ---- Sodium Sulfide Nonahydrate ---- Sodium Tartrate ---- Sodium Thiosulfate ---- Benzyl Benzoate ---- Selenious Acid Manufacturers & Exporters

Sodium Diacetate Specifications of Commercial Pure & FCC Food Grade Manufacturers & Exporters Please visit Sodium Diacetate USP NF ACS BP Ph Eur EP JP IP Analytical reagent FCC Food grade Manufacturers our associates world class FDA-GMP approved, ISO-9001 Certified facility Anmol Chemicals Sodium Diacetate CAS Number 126-96-5 Sodium Diacetate SDS, Safety Data Sheet MSDS, Material Safety Data Sheet 08-July-22 Section 1: Chemical Product Product Name & Other Names: Sodium diacetate or Sodium di acetate. CAS#: 126-96-5 EINECS EC number: 204-814-9 FEMA Number: 3900 Chemical Formula: C4H7O4Na+xH2O Molecular Weight: 142.09 C4H7O4Na Relevant uses and uses advised against (if any): Industrial Manufacturing. Supplier: As per letterhead. Section 2: Hazards Identification GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910 Classification according to Regulation (EC) No 1272/2008 Serious eye damage/eye irritation Category 2A, H319 Labeling according to GHS & Regulation (EC) No 1272/2008 GHS Label Elements Irritant Signal Word: Warning Hazard statements: H319: Causes serious eye irritation. Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapors/spray. P262: Do not get in eyes, on skin, or on clothing. P264: Wash --- thoroughly after handling. P280: Wear protective gloves/protective clothing/eye protection/face protection. P281: Use personal protective equipment as required. P302+P352 - IF ON SKIN: Wash with plenty of soap and water. P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337+313: If eye irritation persists get medical advice/attention. Section 3: Composition and Information on Ingredients Product Name & Other Names: Sodium diacetate or Sodium di acetate. CAS #.: 126-96-5 EINECS EC number: 204-814-9 Section 4: First Aid Measures Always seek medical attention after first aid measures are provided. Eye Contact: Check for and remove any contact lenses. Immediately flush eyes with running water for at least 15 minutes, keeping eyelids open. Cold water may be used. Do not use an eye ointment. Seek medical attention. Skin Contact: After contact of Sodium Diacetate with skin, wash immediately with plenty of water. Gently and thoroughly wash the contaminated skin with running water and non-abrasive soap. Be particularly careful to clean folds, crevices, creases, and groin. Cold water may be used. Cover the irritated skin with an emollient. If irritation persists, seek medical attention. Wash contaminated clothing before reusing. Serious Skin Contact: Wash with a disinfectant soap and cover the contaminated skin with an anti-bacterial cream. Seek medical attention. Inhalation: Allow the victim to rest in a well-ventilated area. Seek immediate medical attention. Serious Inhalation: Not available. Ingestion: Do not induce vomiting. Loosen tight clothing such as a collar, tie, belt, or waistband. If the victim is not breathing, perform mouth-to-mouth resuscitation. Seek immediate medical attention. Section 5: Fire and Explosion Data Flammability of the Product: May be combustible at high temperature. Products of Combustion: These products are carbon oxides (CO, CO2). Some metallic oxides. Fire Fighting Media and Instructions: SMALL FIRE: Use DRY chemical powder. LARGE FIRE: Use water spray, fog, or foam. Do not use water jet. Extinguishing Media Not recommended: Avoid using solid water jet as it may scatter the fire. Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used. Section 6: Accidental Release Measures Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind. Do not touch the spilled material. Environmental precautions: Do not let the product enter drains, soil, or water sources. Methods and materials used for containment cleanup procedures and Storage: Small Spill: Use appropriate tools to put the spilled solid Sodium diacetate in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to local and regional authority requirements. Large Spill: Do not inhale vapors, mist, or gas. Avoid dust formation. Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g., sand, earth, diatomaceous earth, vermiculite). Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow to evacuate as per law. Section 7: Handling and Storage Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces. Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents. Ground all equipment. Combustible material should be stored away from extreme heat and away from strong oxidizing agents. Section 8: Exposure Controls/Personal Protection Exposure Limits: This product does not contain any hazardous materials with occupational exposure limits established by the region-specific regulatory bodies. There is a blanket recommendation of 10 mg/m3 for inspirable dusts or mists when limits have not otherwise been established. Engineering Controls: Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits. Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. Skin Protection: Wear protective gloves and clean body-covering clothing. Eye Protection: Use chemical safety goggles and/or full-face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area. Other Control Measures: Maintain good housekeeping in work area. Dust deposits on floors and other surfaces may pick up moisture and cause the surfaces to become slippery and present safety hazards. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling. Section 9: Physical and Chemical Properties Physical state and appearance: Solid. (Solid white crystalline powder.) Odor: Acetic acid. (Strong.) Odor threshold: Not available. pH (1% solution/water): 5 [Acidic.] Relative density: Not available. Melting Point: 328C (622.4F) Initial boiling point and boiling range: Not available. Flash point: Not available. Auto-ignition temperature: No information found. Decomposition temperature: No information found. Upper/lower flammability or explosive limits: No information found. Vapor pressure: No information found. Vapor density: No information found. Evaporation rate: No information found. Flammability (solid, gas): No information found. Partition coefficient: n-octanol/water: No information found. Solubility: Sodium Diacetate is easily soluble in cold water, hot water. Viscosity: No information found. Chemical Formula: C4H7O4Na+xH2O Molecular Weight: 142.09 C4H7O4Na Section 10: Stability and Reactivity Data Stability: Stable under good condition of storage. Incompatibility with various substances: Strong oxidizing agents. Corrosivity: Non-corrosive in presence of glass. Polymerization: No. Section 11: Toxicological Information Toxicity to Animals: LD50 Rat dermal >2,000 mg/kg LD50 Rats oral 5,600 mg/kg Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as possible or confirmed human carcinogen by IARC, ACGIH, OSHA and NTP. Teratogenic Effects: No information found. Mutagenic Effects: No information found. Developmental Toxicity: No information found. Reproductive Effects: No information found. Section 12: Ecological Information Aquatic toxicity (acute): LC50/fish: 184,7 mg/l EC50 >1.000 mg/l aquatic invertebrates 48 hours Results of PBT and vPvB assessment: This substance is not considered to be persistent, bioaccumulating nor toxic (PBT). Section 13: Disposal Considerations Waste Disposal: To be done as per local regulations. Section 14: Transport Information Land Transport DOT USA, TDG Canada & ADR/RID Europe: Not controlled. Sea Transport IMDG/IMO: Not controlled. Air Transport IATA/ICAO: Not controlled. Section 15: Other Regulatory Information USA: SARA 311/312: See section 2. California Proposition 65: Not listed. Section 16 - Additional Information DISCLAIMER: The information and recommendations set forth herein (hereinafter "Information") are presented in good faith and believed correct as of the date hereof. It is compiled from various sources, and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules, or insurance requirements applicable. This SDS MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a professionally trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose. This shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship. In no case shall our company be liable to loss or damages by the product user. Specifications of Sodium Diacetate BP Ph Eur EP JP USP NF IP ACS Analytical Reagent FCC Food grade Manufacturers

Crystal Clear Products and the group companies are manufacturing chemicals since several decades. We have automatic vacuum operated titanium evaporators and SS316 equipments to produce top grade of chemical products. We have toll manufacturers and representatives in China, UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Bangkok Thailand, Kaula Lumpur Malaysia, Dubai UAE etc. & sales representative in Chicago, Houston New York & Los Angeles, USA. Associated units are FDA-GMP certified, Halal and/or Kosher certified, REACH registered, ISO-9001, ISO-22000 HACCP certified, Crisil Rated.

Contact Sodium Diacetate Pure & Food Grade manufacturers exporters at:

Crystal Clear Products
Plot No-C1-1031-9, GIDC Estate, Panoli, Ankleshwar, Gujarat - 393002. India
Telephone Mobile: 91-7506449333; e-mail: info@crystalclearproducts.org

e-mail: info@crystalclearproducts.org

Manufacturers, Suppliers of IP BP Ph Eur EP JP USP NF FCC Food, ACS Reagent Grades of Chemicals like Sodium Diacetate