Plot No-C1-1031-9, GIDC Estate, Panoli, Ankleshwar, Gujarat - 393002. India Telephone Mobile: 91-7506449333; e-mail: info@crystalclearproducts.org

Soda Lime ---- Sodium Acetate ---- Sodium Adipate ---- Sodium Alginate ---- Sodium Ascorbate ---- Sodium Benzoate ---- Sodium Bicarbonate ---- Sodium Bisulfate ---- Sodium Borate, Borax ---- Sodium Bromate ---- Sodium Bromide ---- Sodium Butyl Paraben ---- Sodium Butyrate ---- Sodium Caprylate ---- Sodium Chloride ---- Sodium Citrate ---- Sodium Diacetate ---- Sodium Erythorbate -- Sodium Ethyl Paraben ---- Sodium Formate ---- Sodium Gluconate ---- Sodium Glycerophosphate ---- Sodium Formaldehyde Bisulfite ---- Sodium Hyaluronate ---- Sodium Hydroxide ---- Sodium Lactate ---- Sodium Lactobionate ---- Sodium Lauryl Sulfate ---- Sodium Methyl Paraben ---- Sodium Metabisulfite ---- Sodium Molybdate ---- Sodium Nitrate ---- Sodium Nitrite ---- Sodium Oleate ---- Sodium Perborate ---- Sodium Persulfate ---- Sodium Phosphate Monobasic ---- Sodium Phosphate Dibasic ---- Sodium Phosphate Tribasic ---- Sodium Picosulfate ---- Sodium Propyl Paraben ---- Sodium Propionate ---- Sodium Saccharin ---- Sodium Selenate ---- Sodium Selenite ---- Sodium Stibogluconate ---- Sodium Sulfate ---- Sodium Sulfide Nonahydrate ---- Sodium Tartrate ---- Sodium Thiosulfate ---- Benzyl Benzoate ---- Selenious Acid Manufacturer & Exporter

Sodium Ethyl Paraben or Sodium Ethylparaben or Ethyl Hydroxybenzoate Sodium Specifications of Commercial Pure & BP Ph Eur EP JP USP NF IP Analytical Reagent FCC Food Grade Manufacturers & Exporters Please visit Sodium Ethyl Paraben or Ethyl Hydroxybenzoate Sodium USP NF ACS BP Ph Eur EP JP IP Analytical reagent FCC Food grade Manufacturers our associates world class FDA-GMP approved, ISO-9001 Certified facility Anmol Chemicals Sodium Ethyl Paraben or Sodium Ethylparaben or Ethyl Hydroxybenzoate Sodium CAS Number 35285-68-8 Ethylparaben Sodium or Sodium Ethyl Paraben or Sodium ethyl p-hydroxybenzoate SDS, Safety Data Sheet MSDS, Material Safety Data Sheet 04-July-22 SECTION 1. PRODUCT IDENTIFICATION Product Name & Other Names: Sodium Ethylparaben, Sodium Ethyl Paraben or Sodium Ethyl Hydroxybenzoate. CAS Number: 35285-68-8 EINECS EC Number: 252-487-6 Molecular Formula: C9H9NaO3 Molecular Weight: 188.2 Relevant uses and uses advised against (if any): Industrial Manufacturing. Supplier: As per the letterhead. SECTION 2. HAZARDS IDENTIFICATION GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910 Classification according to Regulation (EC) No 1272/2008 Skin corrosion/irritation (Category 2), H315 Serious eye damage (Category 1), H318 Labeling according GHS USA & Regulation (EC) No 1272/2008 GHS Label Elements Corrosive Signal Words: Danger Hazard statements: H315: Causes skin irritation. H318: Causes serious eye damage. Precautionary statements: P261: Avoid breathing dust/ fume/ gas/ mist/ vapors/ spray. P262: Do not get in eyes, on skin, or on clothing. P264 Wash skin thoroughly after handling. P280: Wear protective gloves/protective clothing/eye protection/face protection. P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. SECTION 3. COMPOSITION / INFORMATION ON INGREDIENTS Product Name & Other Names: Sodium Ethylparaben, Sodium Ethyl Paraben or Sodium Ethyl Hydroxybenzoate. CAS Number: 35285-68-8 EINECS EC Number: 252-487-6 SECTION 4. FIRST AID MEASURES Always seek medical attention after first aid measures are provided. Eye Contact: Do not allow victim to rub eye (s). Let the eye (s) water naturally for a few minutes. If particle/dust does not dislodge, flush with lukewarm, gently flowing water for 5 minutes or until particle/dust is removed, while holding eyelid (s) open. If irritation persists, obtain medical attention. DO NOT attempt to manually remove anything stuck to the eye. Skin Contact: Remove contaminated clothing, shoes, and leather goods (e.g. watchbands, belts). Quickly and gently blot or brush away excess chemical. Wash gently and thoroughly with lukewarm gently flowing water and non-abrasive soap for 5 minutes. If irritation persists, repeat flushing. Obtain medical advice. Completely decontaminate clothing, shoes and leather goods before reuse or else discard. Inhalation: If symptoms are experienced, remove source of contamination or move victim to fresh air. Obtain medical advice. Ingestion: Never give anything by mouth if victim is rapidly losing consciousness or is unconscious or convulsing. Have victim rinse mouth thoroughly with water. DO NOT INDUCE VOMITING. SECTION 5. FIRE FIGHTING MEASURES Fire and Explosion Hazards: Not considered flammable but may burn at high temperatures. Extinguishing Media: Use means of extinction appropriate for the surrounding fire conditions such as water spray, carbon dioxide, dry chemical, or foam. Fire Fighting: Apart from oxides of carbon. toxic fumes may result from combustion. As with any fire, fire fighters should be fully trained and wear full protective clothing including an approved, self-contained breathing apparatus which supplies a positive air pressure within a full face-piece mask. Use water spray to cool unopened containers. Extinguishing Media Not recommended: Avoid using solid water jet as it may scatter the fire. Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used. Uninvolved persons should evacuate to a safe place. SECTION 6. ACCIDENTAL RELEASE MEASURES Procedures for Cleanup: Stop release if possible, to do so safely. Contain spill, isolate hazard area, and deny entry. Sweep up or vacuum. Place contaminated material in suitable, labeled containers for final disposal. Dispose of waste material consistent with the requirements of waste disposal authorities. Personal Precautions: Gloves and coveralls or other protective clothing are recommended for persons responding to an accidental release. Close-fitting safety goggles may be necessary in some circumstances to prevent eye contact. Environmental Precautions: This Contamination of soil and water should be prevented. Keep spillage from entering soil, streams, or sewers. SECTION 7. HANDLING AND STORAGE Store in cool, dry, well-ventilated area away from incompatible substances. Protect from physical damage. Keep away from sources of ignition. Take measures to prevent the build-up of electrostatic charge. It is good practice to keep Sodium container closed when not in use. Avoid generating dust and the release of dust into the workplace. May form combustible dust concentrations in air. Use care during processing to minimize generation of dust. Good housekeeping is important to prevent accumulations of dust. Always practice good personal hygiene. Store at 15C to 25C. SECTION 8. EXPOSURE CONTROLS / PERSONAL PROTECTION Exposure Limits: This product does not contain any hazardous materials with occupational exposure limits established by the region-specific regulatory bodies. Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. Skin Protection: Wear protective gloves and clean body-covering clothing. Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area. Other Control Measures: Maintain good housekeeping in work area. Dust deposits on floors and other surfaces may pick up moisture and cause the surfaces to become slippery and present safety hazards. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling. SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES Appearance: It is a white, odorless granules or powder. Odor: None Odor threshold: Not available. pH: 10 @ 1 gm/l Relative density: Not available. Freezing/Melting Point/Range: >115C Boiling Point: 297C (Decomposes) Flash point: Not available. Auto-ignition temperature: No information found. Decomposition temperature: No information found. Upper/lower flammability or explosive limits: No information found. Vapor pressure: No information found. Vapor density: No information found. Evaporation rate: No information found. Flammability (solid, gas): No information found. Partition coefficient: n-octanol/water: No information found. Solubility in Water: Soluble in water. Viscosity: No information found. Molecular Formula: C9H9NaO3 Molecular Weight: 188.2 SECTION 10. STABILITY AND REACTIVITY Stability and Reactivity: Stable and not considered reactive under normal temperatures and pressures. Hazardous polymerization or runaway reactions will not occur. Incompatibilities: Oxidizing agents. Avoid excessive heat, spark, flame, ignition, and moisture. Hazardous Decomposition Products: ;High temperature operations will generate carbon oxide and fumes. SECTION 11. TOXICOLOGICAL INFORMATION Acute Toxicity (Oral LD50): > 2,000 mg/kg Rat Carcinogenicity: IARC: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible, or confirmed human carcinogen by IARC. Teratogenic Effects: No information found. Mutagenic Effects: No information found. Developmental Toxicity: No information found. Reproductive Effects: No information found. SECTION 12. ECOLOGICAL INFORMATION Eco toxicological data: No data available. May cause long lasting harmful effects to aquatic life. Biodegradability: No information found. Mobility in soil: No information found. SECTION 13. DISPOSAL CONSIDERATIONS Do not wash the material down drain. Put uncontaminated material back into the process if possible. Place contaminated material in suitable, labeled containers for disposal. Dispose of waste material consistent with the requirements of waste disposal authorities. SECTION 14. TRANSPORT INFORMATION Land Transport DOT USA, TDG Canada & ADR/RID Europe: Not controlled. Air Transport IATA/ICAO: Not controlled. Sea Transport IMDG/IMO: Not controlled. SECTION 15. REGULATORY INFORMATION USA Regulations: SARA 311/312 Hazards: See section 2. California Prop. 65 Components: This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm. SECTION 16 - ADDITIONAL INFORMATION DISCLAIMER: The information and recommendations set forth herein are presented in good faith and believed correct as of the date hereof. It is compiled from various sources, and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules, or insurance requirements applicable. This SDS MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a professionally trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose. This shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship. In no case shall our company be liable to loss or damages by the product user. Specifications of Sodium Ethyl Paraben or Ethyl Hydroxybenzoate Sodium BP Ph Eur EP JP USP NF IP ACS Analytical Reagent FCC Food grade Manufacturers

Crystal Clear Products and the group companies are manufacturing chemicals since several decades. We have automatic vacuum operated titanium evaporators and SS316 equipments to produce top grade of chemical products. We have toll manufacturers and representatives in China, UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Bangkok Thailand, Kaula Lumpur Malaysia, Dubai UAE etc. & sales representative in Chicago, Houston New York & Los Angeles, USA. Associated units are FDA-GMP certified, Halal and/or Kosher certified, REACH registered, ISO-9001, ISO-22000 HACCP certified, Crisil Rated.

Contact Sodium Ethyl Paraben or Sodium Ethylparaben or Ethyl Hydroxybenzoate Sodium IP BP Ph Eur EP JP USP NF ACS Analytical Reagent FCC Food Grade manufacturers exporters at:

Crystal Clear Products
Plot No-C1-1031-9, GIDC Estate, Panoli, Ankleshwar, Gujarat - 393002. India
Telephone Mobile: 91-7506449333; e-mail: info@crystalclearproducts.org

e-mail: info@crystalclearproducts.org

Manufacturers, Suppliers of IP BP Ph Eur EP JP USP NF FCC Food, ACS Reagent GMP Grades of Chemicals like Sodium Ethyl Paraben or Sodium Ethylparaben or Ethyl Hydroxybenzoate Sodium