Plot No-C1-1031-9, GIDC Estate, Panoli, Ankleshwar, Gujarat - 393002. India Telephone Mobile: 91-7506449333; e-mail: info@crystalclearproducts.org

Acetic Acid Glacial & Solution ---- Boric Acid ---- Formaldehyde Solution ---- Fumaric Acid ---- Lactobionic Acid ---- Maleic Acid ---- Malic Acid ---- Oleic Acid ---- Phosphoric Acid ---- Phosphorous Acid ---- Phthalic Acid ---- Picolinic Acid ---- Picric Acid ---- Pidolic Acid ---- Propionic Acid ---- Pyruvic Acid ---- Salicylic Acid ---- Selenious Acid ---- Sorbic Acid ---- Stearic Acid ---- Succinic Acid ---- Sulfamic Acid ---- Tartaric Acid ---- Undecylenic Acid Manufacturer & Exporter

Undecenoic Acid BP Ph Eur, Undecylenic Acid USP Grade Specifications of Manufacturers & Exporters Please visit Undecenoic Acid or Undecylenic Acid USP NF ACS BP Ph Eur EP JP IP Analytical reagent FCC Food grade Manufacturers our associates world class FDA-GMP approved, ISO-9001 Certified facility Anmol Chemicals (Meltig Point around 24C) Undecenoic Acid or Undecylenic Acid CAS Number 112-38-9 Undecylenic Acid USP Grade Specifications: C11H20O2 --- 184.28 10-Undecenoic acid. 10-Undecenoic acid CAS 112-38-9 Undecylenic Acid contains not less than 97.0 percent and not more than 100.5 percent of C11H20O2. Packaging and storage: Preserve in tight, light-resistant containers. Identification: A: To 1 mL add potassium permanganate TS, dropwise: the permanganate color is discharged. B: Place 3 mL of it and 3 mL of freshly distilled aniline in a tall test tube, and heat for 10 minutes at a rate such that the ring of condensate remains just below the mouth of the tube. Cool, add 10 mL of alcohol and 10 mL of ether, and transfer to a separator. Wash the ether solution with four 20-mL portions of water and discard the water washings. Heat on a steam bath until the odor of ether no longer is perceptible, then add a few mg of activated carbon, mix, and filter. Evaporate the filtrate nearly to dryness and recrystallize the residue from 70 percent alcohol: the anilide so obtained melts between 66C and 67.5C. Specific gravity: between 0.910 and 0.913. Congealing range: not lower than 21C. Refractive index: between 1.447 and 1.448. Residue on ignition: not more than 0.15%. Water-soluble acids: Shake 5 mL with 5 mL of water and filter the water layer through a filter paper previously moistened with water. Add 1 drop of methyl orange and titrate with 0.01 N sodium hydroxide VS: not more than 1.0 mL of 0.010 N sodium hydroxide is required to match the color produced by 1 drop of methyl orange in 5 mL of water. Iodine value: between 131 and 138. Specifications of Undecenoic Acid BP Ph Eur Grade C11H20O2 --- 184.3 --- CAS 112-38-9 DEFINITION Undec-10-enoic acid. Content: 97.0 per cent to 102.0 per cent. CHARACTERS Appearance: White or very pale yellow, crystalline mass or colourless or pale-yellow liquid. Solubility: Practically insoluble in water, freely soluble in ethanol (96 per cent) and in fatty and essential oils. IDENTIFICATION A. Refractive index: 1.447 to 1.450, determined at 25±0.5C. B. Freezing point: 21C to 24C. C. To 2.0 g add 2 mL of freshly distilled aniline and boil under a reflux condenser for 10 min. Allow to cool and add 30 mL of ether. Shake with 3 quantities, each of 20 mL, of dilute hydrochloric acid and then with 20 mL of water. Evaporate the organic layer to dryness on a water-bath. After re-crystallising twice from ethanol (70 per cent V/V) and drying in vacuo for 3 h, the residue melts at 66C to 68C. D. Dissolve 0.1 g in a mixture of 2 mL of dilute sulfuric acid and 5 mL of glacial acetic acid. Add dropwise 0.25 mL of potassium permanganate solution. The colour of the potassium permanganate is discharged. TESTS Peroxide value: Maximum 10. Fixed and mineral oils: To 1.0 g add 5 mL of sodium carbonate solution and 25 mL of water and boil for 3 min. The hot solution is not more opalescent than reference suspension. Water-soluble acids: To 1.0 g add 20 mL of water heated to 35-45C and shake for 2 min. Cool and filter the aqueous layer through a moistened filter. To 10 mL of the filtrate add 0.1 mL of phenolphthalein solution. Not more than 0.1 mL of 0.1 M sodium hydroxide is required to change the colour of the indicator. Degree of unsaturation: Dissolve 85.0 mg in a mixture of 5 mL of dilute hydrochloric acid and 30 mL of glacial acetic acid. Using 0.05 mL of indigo carmine solution as indicator, added towards the end of the titration, titrate with0.0167 M bromide-bromate until the colour changes from blue to yellow. 8.9 mL to 9.4 mL of0.0167 M bromide-bromate is required. Carry out a blank titration. Sulphated ash: Maximum 0.1 per cent, determined on 0.50 g. SDS MSDS of Undecenoic Acid or Undecylenic Acid BP Ph Eur EP JP USP NF IP ACS Analytical Reagent FCC Food grade Manufacturers

Crystal Clear Products and the group companies are manufacturing chemicals since several decades. We have automatic vacuum operated titanium evaporators and SS316 equipments to produce top grade of chemical products. We have toll manufacturers and representatives in China, UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Bangkok Thailand, Kaula Lumpur Malaysia, Dubai UAE etc. & sales representative in Chicago, Houston New York & Los Angeles, USA. Associated units are FDA-GMP certified, Halal and/or Kosher certified, REACH registered, ISO-9001, ISO-22000 HACCP certified, Crisil Rated.

Contact Undecenoic Acid or Undecylenic Acid IP BP Ph Eur EP JP USP NF ACS Analytical Reagent FCC Food Grade manufacturers exporters at:

Crystal Clear Products
Plot No-C1-1031-9, GIDC Estate, Panoli, Ankleshwar, Gujarat - 393002. India
Telephone Mobile: 91-7506449333; e-mail: info@crystalclearproducts.org

e-mail: info@crystalclearproducts.org

Manufacturers, Suppliers of IP BP Ph Eur EP JP USP NF FCC Food, ACS Reagent GMP Grades of Chemicals like Undecenoic Acid or Undecylenic Acid